Monitor Presence Icons - NEC DT900 Series User Manual

Table 9.1
DT900/DT900S Series Phone User Guide
1
• None - Do not monitor presence state changes for this Speed Dial Key
2
• Visual - Presence state is shown visually using the LED on the Speed Dial Key
when a Speed Dial is assigned to the entry, and a Presence icon is shown in the
Personal Directory and on the DESI-Less display of the phone.
3
• Visual and Soft Ring - Presence state is shown visually using the LED on the
Speed Dial Key when a Speed Dial is assigned to the entry, and a Presence icon is
shown in the Personal Directory and on the DESI-Less display of the phone. When
a call is ringing on the monitored terminal, play a soft ring tone.
3
Option Visual and Soft Ring is only valid for SIP@Net platforms. Contact
Note:
your system administrator to determine if Soft Ring is available on your
system.
If you have Visual Monitor Settings for an entry in the Directory that also has an
assigned Speed Dial, the presence (Available, Busy or Offline) of the line is shown in
the Directory.

Monitor Presence Icons

Type
Line Key Registered
Unregistered
Speed Dial Key Not Available
(No Monitoring)
BLF Idle
Ringing (SIP@Net)
Ringing (3C system)
Subscription Failed
Online (3C system)
(Phone is Online)
On the Phone
(Phone is in use)
Held (3C system)
Busy
If you have Visual monitor settings for a Speed Dial entry, the presence (Available,
Busy or Offline) of the line is shown by the LED Color.
C A L L H I S T O R Y A N D D I R E C T O R I E S
Status Icon
Call History
9 -135