Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Extron electronics EDID 101H 4K PLUS
Summary of Contents for Extron electronics EDID 101H 4K PLUS
- Page 1 User Guide EDID 101H 4K PLUS HDMI EDID Emulator 68‑3109‑01 Rev. A 03 20...
- Page 2 Safety Instructions Safety Instructions • English Istruzioni di sicurezza • Italiano Il simbolo, , se usato sul prodotto, serve ad AVVERTENZA: WARNING: This symbol, ,when used on the product, is avvertire l’utente della presenza di tensione non isolata pericolosa intended to alert the user of the presence of uninsulated dangerous all’interno del contenitore del prodotto che può...
- Page 3 ついては、 エクス トロンのウェブサイ ト より 『Extron Safety www.extron.com and Regulatory Compliance Guide』 (P/N 68‑290‑01) をご覧ください。 Copyright © 2020 Extron Electronics. All rights reserved. Trademarks All trademarks mentioned in this guide are the properties of their respective owners. The following registered trademarks( ®...
- Page 4 FCC Class A Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. The Class A limits provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
- Page 5 Conventions Used in this Guide Notifications The following notifications are used in this guide: ATTENTION: • Risk of property damage. • Risque de dommages matériels. NOTE: A note draws attention to important information. TIP: A tip provides a suggestion to make working with the application easier. Software Commands Commands are written in the fonts shown here: ^AR Merge Scene,,Op1 scene 1,1 ^B 51 ^W^C...
-
Page 7: Table Of Contents
Introduction ..........1 Reference Information ....... 20 About this Guide ............1 Mounting the EDID 101H 4K PLUS....... 20 About the EDID 101H 4K PLUS ....... 1 Desktop Placement..........20 Rack Mounting........... 20 EDID 101H 4K Plus Features ........1 Connecting to the USB Port........21 Application Diagram .......... -
Page 9: Introduction
Supported HDMI 2.0b specification — Features include data rates up to 18 Gbps, Deep Color up to 12-bit, 3D, and CEC pass through. • Supports multiple embedded audio formats — The EDID 101H 4K PLUS is compatible with a broad range of multi channel audio signals, providing reliable operation with HDMI sources. -
Page 10: Application Diagram
Supports computer and video resolutions up to 4K — Resolutions up to • 4096x2160 @ 60Hz, 8-bit, 4:4:4 chroma sampling. • HDCP compliant — Ensures display of content protected media and interoperability with other HDCP-compliant devices. • HDCP authentication and signal presence confirmation — Provides real-time HDCP verification status via front panel LEDs and USB, providing feedback to a system operator or helpdesk support staff. -
Page 11: Installation And Configuration
Do not connect power to the source, the display, or the EDID 101H 4K PLUS at this time. TIP: Configure the EDID 101H 4K PLUS prior to the installation if access is restricted after mounting or installation Configure the EDID 101H 4K PLUS (see EDID Configuration on page 7). -
Page 12: Front Panel Features
SIGNAL CONFIG HDCP Extron EDID 101H 4K PLUS Figure 1. EDID 101H 4K PLUS Front Panel Indicators and Configuration Port Power LED – Lights when an external power supply is connected and powered. Config port – Connect a host computer using a mini USB type-B connector for... -
Page 13: Rear Panel Features And Cabling
Rear Panel Features and Cabling EDID 101H 4K PLUS POWER 0.3A MAX INPUT OUTPUT Figure 2. EDID 101H 4K PLUS Rear Panel Power Connector – Connect the included 12 VDC power supply to this two-pole, 3.5 mm captive screw connector. POWER Smooth 0.3A MAX Ridges SECTION A–A... -
Page 14: Securing The Hdmi Connector Lockit Lacing Bracket
Securing the HDMI Connector LockIt Lacing Bracket Follow these instructions to secure the input connectors to the switcher with the LockIt HDMI lacing bracket provided: Figure 4. LockIt Lacing Bracket Diagram Plug the HDMI cable into the rear panel connection (see figure 4, Loosen the HDMI connection mounting screw from the panel enough to allow the LockIt lacing bracket to be placed over it . -
Page 15: Edid Configuration
ATTENTION: • Always use a power supply provided by or specified by Extron. Use of an unauthorized power supply voids all regulatory compliance certification and may cause damage to the supply and the end product. • Utilisez toujours une source d’alimentation fournie ou recommandée par Extron. L’utilisation d’une source d’alimentation non autorisée annule toute conformité... -
Page 16: Store An Edid In A User Slot
NOTE: EDID stored in user slots C through F are saved until a new EDID is stored to that slot or the device is reset. EDID IN OUT STORE SIGNAL CONFIG HDCP Extron EDID 101H 4K PLUS Figure 5. Store LED, Button and Rotary Switch (in Position E) Rotary Native Refresh Rate Video Audio... - Page 17 Rotary Store Button Description Switch Non-functional EDID storing is not possible on the selected rotary position. Green Button has been The Store button has been pressed and the (flashing) pressed and EDID is currently being stored to the selected released user store slot.
-
Page 18: Configuration Software
If necessary, before updating firmware, download and install Firmware Loader. Download and install the PCS software for configuring the EDID 101H 4K PLUS. Click the Download tab (see figure 7, The Download Center opens. -
Page 19: Installing The Software
Installing the Software The Extron Product Configuration Software (PCS) must be downloaded from the Extron website to configure the EDID 101H 4K PLUS. To download PCS: On the PCS page, click Download (see figure 9, Submit the required information to start the download. Note where the file is saved. -
Page 20: Starting The Software
PCS (see Installing the Software on page 11). • The EDID 101H 4K PLUS supports USB connection only. However, all devices located and supported by PCS are listed in the Device Discovery panel (see figure 11). Device Discovery Panel When the PC running PCS is connected to Extron devices via USB and is also connected to a LAN or WAN, the Device Discovery panel lists all PCS compatible devices. -
Page 21: Help Files
101H 4K PLUS help file for assistance with the device user interface. Offline Device Preview The EDID 101H 4K PLUS configuration options can be viewed without connecting to a device, but settings cannot be changed or saved. To open a device tab: In the Start-up tab drop-down list, select New Configuration File (see figure 13). -
Page 22: Using The Software And Device Menus
Using the Software and Device Menus The PCS software provides configuration and operation of the connected device from a control device. Access the PCS Software Help file or the EDID 101H 4K PLUS Help file for further information. EDID 101H 4K PLUS • Configuration Software... -
Page 23: Remote Communication And Control
Remote Communication and Control This section describes remote operation of the EDID 101H 4K PLUS. Topics include: Using Simple Instruction Set (SIS) Commands • • Command and Response Table for SIS Commands Using Simple Instruction Set (SIS) Commands The EDID 101H 4K PLUS is remotely set up and controlled using Extron SIS commands issued from a host computer or other device, such as a control system. -
Page 24: Using The Command And Response Table
Using the Command and Response Table The command and response table is shown on the following pages. Symbols are used throughout the table to represent variables in the command and response fields. Symbol definitions and an ASCII-to-hexadecimal (HEX) conversion table are shown below. Command and response examples are shown throughout the command and response table. -
Page 25: Symbol Definitions
Symbol Definitions X1) = Verbose mode: CR/LF (carriage return with line feed) (hex 0D 0A) 0=clear/none 1=verbose mode (default) 2=tagged responses for queries 3=verbose mode and tagged responses for queries. X1! = Device name. The name is a text string up to 24 Soft carriage return (no line feed) (hex 0D) alphanumeric characters including hyphens (-), with no spaces. -
Page 26: Command And Response Table For Sis Commands
Command and Response Table for SIS Commands ASCII Command Response Command Additional Description (Host to Device) (Device to Host) Unsolicited Responses X# * X# X1# ] Broadcast when signal or HDCP status changes on any input or output •HdcpI •HdcpO X^ ] Broadcast when the front panel rotary switch changes position EdidA... - Page 27 KEY: = 0 = (off, disabled, or not detected), 1 = (on, enabled, or not detected) = Input HDCP status: 0 = No video detected. 1 = Video detected without HDCP. 2 = Video detected with HDCP. = Output HDCP status: 0 = No active sink detected. 1 = Video detected without HDCP.
-
Page 28: Reference Information
Reference Information • Mounting the EDID 101H 4K PLUS Connecting to the USB Port • • DataViewer • Updating the Firmware Mounting the EDID 101H 4K PLUS The one inch high, quarter-rack width, six inch deep enclosure can be Set on a table, • •... -
Page 29: Connecting To The Usb Port
1 2 3 4 WiFi Mini Type B Type A USB Cable Ports EDID IN OUT STORE SIGNAL CONFIG HDCP Extron EDID 101H 4K PLUS Figure 16. Connecting a PC to the Front Panel USB Port EDID 101H 4K PLUS • Reference Information... -
Page 30: Dataviewer
DataViewer DataViewer is an enhanced terminal emulation program that facilitates analysis of RS-232, USB, and TCP/IP communication with Extron devices. The software allows users to send commands to a device and view the responses in ASCII or hexadecimal format. Command and response logs can be saved in text or HTML format. -
Page 31: Updating The Firmware
Updating the Firmware Firmware updates are released periodically on the Extron website. You can find the version Command and Response currently loaded on your device using SIS commands (see Table for SIS Commands on page 18). Compare this with the latest release for the EDID 101H 4K PLUS on the Extron website and decide whether to update your firmware. -
Page 32: Downloading Edid 101H 4K Plus Firmware
Downloading EDID 101H 4K PLUS Firmware To obtain the latest version of firmware for your device: Go to the Extron website at www.extron.com. Click the Download tab. On the Download Center page, click the Firmware link from the list on the left sidebar menu. - Page 33 ) now displays the device name. Click Browse ( ), then locate and open the previously downloaded firmware update file. Click Add ( The main screen opens with the EDID 101H 4K PLUS high-lighted (see figure 19 on the following page). EDID 101H 4K PLUS • Reference Information...
- Page 34 ATTENTION: • Valid firmware files must have the file extension S19. A file with any other extension is not a firmware upgrade for this device and could cause the device to stop functioning. • Les fichiers firmware valides doivent contenir l’extension fichier S19. Un fichier avec n’importe quelle autre extension n’est pas une mise à...
-
Page 35: Extron Warranty
Extron Electronics makes no further warranties either expressed or implied with respect to the product and its quality, performance, merchantability, or fitness for any particular use. In no event will Extron Electronics be liable for direct, indirect, or consequential damages resulting from any defect in this product even if Extron Electronics has been advised of such damage.