Price-Per-Unit Tariff Plan - Landis+Gyr E470 User Manual

Page 34 of 69
Example 2
7.3

Price-Per-Unit Tariff Plan

© Landis+Gyr
Issue: 1.8
If a billing period is specified as 90-day duration starting on the 5th June the
billing period would operate as follows:
5th
J J
Billing Period ( 90 days)
The billing period is calculated 90 days form the start date. After each 90
day period the Block tariff's billing period usage value is reset. As a result
the block tariff resets and uses block 1 prices until the first power switch
threshold is reached.
The meter holds information regarding the billing cycle held in the meter,
this information uncludes the start of the next billing period, the start of the
current billing period and what day of the current billing period the meter is
in.
The tariff prices applied by the meter can be complied from:
TOU tariff

 Block tariff
 Combination of both
The tariff will consist of a matrix of up to 16 prices as shown
diagrammatically below:
Rate 1
PPU 1
Rate 2
PPU 2
Rate 3
PPU 3
Rate 4
PPU 4
Block 1 Block 2 Block 3 Block 4
2nd (calculated)
A S O
Billing Period (90 days)
Block Tariff
kWh usage value reset
Next B.P. automatically starts
PPU 5 PPU 9
PPU 6 PPU 10
PPU7 PPU 11
PPU8 PPU 12
Block tariff prices
E470 Tokenless Smart Prepayment Meter
Tariff Features
1st(calculated)
N D
PPU 13
PPU 14
PPU 15
PPU 16