Icons; Present Balance Register - Landis+Gyr E470 User Manual

Meter Displays
9.2

Icons

9.2.1 Currency
9.2.2 GSM Network Signal Strength
9.3

Present Balance Register

E470 Tokenless Smart Prepayment Meter
Issue: 1.8
Tamper detection

SIM

 Reverse energy
It is possible to advance through the displays in sequence by pressing the
display cycle button. At the end of the display list the meter shows the
message 'display end' and reverts to the configured default display.
Optionally the meter can auto cycle the display list with a configurable
interval between display changes of 1 and 20 seconds.
Customer displays include icons to display currencies in Pounds Sterling or
Euros. The meter will show the currency in use using either £ or € signs.
The display will show a signal network strength indicator for installer and
customer use. Optionally the signal strength indicator may be configured
not to show after the meter is installed i.e. indicate to the installer only.
The indicator will show three levels of signal strength:
Less than 5% signal strength

5-25% signal strength-

25-75% signal strength -

 Above 75% signal strength -
If a network is not present the
communication cannot be made. Reliable completion of the meters
autonomous reporting, successful credit transaction and remote
configuration is dependant on there being a single bar on display, i.e. >5%
signal strength.
During SIM replacement the whole symbol
power is removed to the SIM card reader and the SIM may be removed.
The Present Balance Register indicates the amount of prepaid credit
remaining in the meter. The Present Balance Register may be positive (in
Credit) or negative (in Debt). The Present Balance Register header will
alternate with the active rate (and block if configured with a combination
tariff).
Antenna symbol only
One bar
Two bars
Three bars
symbol will flash to warn that
will flash to indicate
Page 47 of 69
(Both)
(Both)
© Landis+Gyr