Landis+Gyr E470 User Manual page 59

Meter Displays
9.10.3 Arrears Entry from Previous Meter
9.10.4 Authorisation Code Entry
E470 Tokenless Smart Prepayment Meter
Issue: 1.8
The Arrears balance from a previous meter may be entered during the
installation process.
Entry of value is made using the blue button to increment value, 0-9 then
back to 0. Emergency credit button is used to move to next figure. Flashing
character is the active character. Pressing both buttons for 1 second moves
the active character back one place.
£
A R R
€
When the EC button is pressed on the last far right character the process
will move to the next stage.
The entry of the Authorisation code will use the same process for the entry
purchase codes.
The code header will be changed as shown below:
£
A U T H
€
The length of Authorisation Code will be 6-digits. The meter will only allow 6
digits to be entered.
0 0 0 0 0 0
Pence/ kWh
0 0 0 0
Pence/ kWh
Page 59 of 69
© Landis+Gyr