Table of Contents
Advertisement
5 Preparation
5.1 Unpacking the product
1.
Carefully remove the product and accessories from the packaging.
2.
Check the delivery for missing items and evidence of shipping damage.
3.
In the case of damage, hidden defects, and short deliveries, document their nature and
extent and contact the manufacturer or supplier immediately.
4.
Keep packaging for further transport.
5.2 Assembling the handle (optional)
NOTICE
Turning the rotating wheel clockwise when the handle is disassembled can damage the
seal.
Do not turn the rotating wheel clockwise while the handle is disassembled.
Depending on the application and desired holding position, the handpiece can either be used
without the handle or with the optional handle.
The handle can be aligned to point either to the front ...
... or to the back.
Before assembling ensure that the clamping jaw does not project beyond the guide channel.
1.
Insert the handle with the guide in the guide grooves of the DRILLCUT X II/DRILLCUT X
II-35 shaver handpiece and push it into the desired position.
Instructions for use • DRILLCUT-X II/DRILLCUT-X II-35 • WWK497_EN_V1.0_03-2020_IFU_CE-MDR
Preparation
19
Hide quick links:
Advertisement
Table of Contents
