Table of Contents
Advertisement
5 Preparation
5.1 Unpacking the product
1.
Carefully remove the product and accessories from the packaging.
2.
Check the delivery for missing items and evidence of shipping damage.
3.
In the case of damage, hidden defects, and short deliveries, document their nature and
extent and contact the manufacturer or supplier immediately.
5.2 Testing the product
1.
Inspect the product for visible contamination. Do not use if contaminated.
2.
Inspect the product for the following characteristics:
–
Good working order
–
Functionality
–
Correct assembly of the components
–
Completeness
5.3 Assembling the product
1.
Screw the ultrasonic lithotripsy probe into the CALCUSON transducer clockwise.
2.
Tighten the probe using the open-end wrench.
Instructions for use • Ultrasonic lithotripsy probes • GNY449_EN_V1.0_01-2021_IFU_CE-MDR
Preparation
11
Advertisement
Table of Contents
