Preparation; Unpacking The Product; Inspecting The Product; Assembling The Product - Storz TAKE-APART Instructions For Use Manual

5 Preparation

5.1 Unpacking the product

1. Carefully remove the product and accessories from the packaging.
2. Check the delivery for missing items and evidence of shipping damage.
3. In the case of damage, hidden defects, and short deliveries, document their nature and
extent and contact the manufacturer or supplier immediately.

5.2 Inspecting the product

1. Inspect products for visible contamination. Do not use contaminated products.
2. Inspect the products for the following characteristics:
– Good working order
– Functionality
– Correct assembly of the components
– Completeness
Inspect the product for damage, e.g.:
– Rough surfaces
– Sharp corners
– Burred edges
– Protruding parts

5.3 Assembling the product

1. Put the sealing cap on the handle.
2. Attach the outer sheath to the handle and tighten the knurled screw.
3. Insert the inner sheath into the outer sheath and slide it into the carriage slide holder as
far as it will go.
Instructions for use • TAKE-APART Forceps With Double Sheath • ILQ958_EN_V1.0_03-2021_IFU_CE-MDR
Preparation
13