Graco HFRL Setup And Operation Manual page 47

1. Enter the system into Disable mode by pressing the
mode selection key (
screen. By pressing the up or down arrow keys,
make the "Disable" mode selection as shown on
the screen below.
2. Press the Enter key (CF) to make the Disable mode
selection.
3. Enter the setup screens by pressing the lock key
( ), then navigate to the Advanced 4 screen. It
is recommended to temporarily turn off the "Enable
Downloading of USB logs" feature for this process,
as indicated by the un-checked option shown in the
screen below.
4. Select and check the "Use ADM to Program Token"
checkbox option, select out of the current screen
and navigate one screen left. Go to the "Advanced"
setup screen pages.
3A2175Z
) from the main home run
5. Navigate to the Advanced 8 screen, shown below.
The system version of the software currently on the
machine is provided ("1.12.013" in the screen
below).
6. To program a token with a new version, press the
icon, on the bottom left side of the screen.
The screen should appear as shown below.
7. Insert the USB stick with the updated software file
into the bottom of the ADM, and insert the black
programming token into the right side of the ADM.
The token does NOT need to be blanked. The pro-
cess will blank and write the file from the USB stick
to the token.
Maintenance
47