Graco HFRL Setup And Operation Manual page 5

HFRL Models
Part Number Description
HFRL01 HFR for Lamination, 230/1, 1.00:1,
80/80, Carbon Steel
HFRL02 HFR for Lamination, 230/1, 1.08:1,
86/80, Carbon Steel
HFRL03 HFR for Lamination, 230/1, 1.16:1,
100/86, Carbon Steel
HFRL04 HFR for Lamination, 230/1, 1.20:1,
60/50, Carbon Steel
HFRL05 HFR for Lamination, 230/1, 1.23:1,
80/65, Carbon Steel
HFRL06 HFR for Lamination, 230/1, 1.33:1,
80/60, Carbon Steel
HFRL07 HFR for Lamination, 230/1, 1.50:1,
60/40, Carbon Steel
HFRL08 HFR for Lamination, 230/1, 1.60:1,
80/50, Carbon Steel
HFRL09 HFR for Lamination, 230/1, 1.63:1,
65/40, Carbon Steel
HFRL10 HFR for Lamination, 230/1, 1.67:1,
50/30, Carbon Steel
HFRL11 HFR for Lamination, 230/1, 1.86:1,
160/86, Carbon Steel
HFRL12 HFR for Lamination, 230/1, 2.00:1,
50/25, Carbon Steel
HFRL13 HFR for Lamination, 230/1, 2.15:1,
86/40, Carbon Steel
HFRL14 HFR for Lamination, 230/1, 2.40:1,
60/25, Carbon Steel
HFRL15 HFR for Lamination, 230/1, 2.5:1,
50/20, Carbon Steel
HFRL16 ★✖ HFR for Lamination, 400/3, 1.00:1,
80/80, Carbon Steel
HFRL17 ★✖ HFR for Lamination, 400/3, 1.08:1,
86/80, Carbon Steel
HFRL18 ★✖ HFR for Lamination, 400/3, 1.16:1,
100/86, Carbon Steel
HFRL19 ★✖ HFR for Lamination, 400/3, 1.20:1,
60/50, Carbon Steel
HFRL20 ★✖ HFR for Lamination, 400/3, 1.23:1,
80/65, Carbon Steel
HFRL21 ★✖ HFR for Lamination, 400/3, 1.33:1,
80/60, Carbon Steel
HFRL22 ★✖ HFR for Lamination, 400/3, 1.50:1,
60/40, Carbon Steel
3A2175Z
Part Number Description
HFRL23 ★✖ HFR for Lamination, 400/3, 1.60:1,
80/50, Carbon Steel
HFRL24 ★✖ HFR for Lamination, 400/3, 1.63:1,
65/40, Carbon Steel
HFRL25 ★✖ HFR for Lamination, 400/3, 1.67:1,
50/30, Carbon Steel
HFRL26 ★✖ HFR for Lamination, 400/3, 1.86:1,
160/86, Carbon Steel
HFRL27 ★✖ HFR for Lamination, 400/3, 2.00:1,
50/25, Carbon Steel
HFRL28 ★✖ HFR for Lamination, 400/3, 2.15:1,
86/40, Carbon Steel
HFRL29 ★✖ HFR for Lamination, 400/3, 2.40:1,
60/25, Carbon Steel
HFRL30 ★✖ HFR for Lamination, 400/3, 2.5:1,
50/20, Carbon Steel
approved.
★
✖ See 400 V Power Requirements.
400 V Power Requirements
• 400 V systems are intended for International volt-
age requirements. Not for voltage requirements in
North America.
• If a 400 volt configuration is operated in North
America, a special transformer rated for 400 V ("Y"
configuration (4 wire)) may be required.
• North America mostly employs a 3 wire or Delta
configuration. The two configurations are not inter-
changeable.
Models
5