Graco HFRL Setup And Operation Manual page 9

Part Num-
ber Description
HFRS89 HFR for Silicone, 230/1, 10:1, Carbon
Steel, No Feed
HFRS90 ★✖ HFR for Silicone, 400/3, 10:1, Carbon
Steel, No Feed
HFRS91 HFR for Silicone, 230/1, 10:1, Stainless
Steel, No Feed
HFRS92 ★✖ HFR for Silicone, 400/3, 10:1, Stainless
Steel, No Feed
HFRS93 HFR for Silicone, 230/1, 1:1, Carbon
Steel, 55/55 Feed, (40/40 pumps)
HFRS94 HFR for Silicone, 230/1, 1:1, Carbon
Steel, 5/5 Feed, (40/40 pumps)
HFRS95 ★✖ HFR for Silicone, 400/3, 1:1, Carbon
Steel, 55/55 Feed, (40/40 pumps)
HFRS96 ★✖ HFR for Silicone, 400/3, 1:1, Carbon
Steel, 5/5 Feed, (40/40 pumps)
HFRS97 HFR for Silicone, 230/1, 1:1, Stainless
Steel, 55/55 Feed, (40/40 pumps)
HFRS98 HFR for Silicone, 230/1, 1:1, Stainless
Steel, 5/5 Feed, (40/40 pumps)
HFRS99 ★✖ HFR for Silicone, 400/3, 1:1, Stainless
Steel, 55/55 Feed, (40/40 pumps)
HFRSA0 HFR for Silicone, 400/3, 1:1, Stainless
Steel, 5/5 Feed, (40/40 pumps)
★✖
HFRSA1 HFR for Silicone, 230/1, 1:1, Carbon
Steel, No Feed, (40/40 pumps)
HFRSA2 HFR for Silicone, 400/3, 1:1, Carbon
Steel, No Feed, (40/40 pumps)
★✖
HFRSA3 HFR for Silicone, 230/1, 1:1, Stainless
Steel, No Feed, (40/40 pumps)
HFRSA4 HFR for Silicone, 400/3, 1:1, Stainless
Steel, No Feed, (40/40 pumps)
★✖
HFRSA7 HFR for Silicone, 400/3, 2:1, Carbon
Steel, No Feed, (10/5 pumps)
★✖
HFRSA8 HFR for Silicone, 400/3, 2:1, Carbon
Steel, 55/55 Feed, (10/5 pumps)
★✖
approved.
★
✖ See 400 V Power Requirements.
3A2175Z
400 V Power Requirements
• 400 V systems are intended for International volt-
age requirements. Not for voltage requirements in
North America.
• If a 400 volt configuration is operated in North
America, a special transformer rated for 400 V ("Y"
configuration (4 wire)) may be required.
• North America mostly employs a 3 wire or Delta
configuration. The two configurations are not inter-
changeable.
Models
9