Graco HFRL Setup And Operation Manual page 81

Status Screen
The status screen provides all of the operational func-
tionality of the Home screen except for operating mode
selection. Refer to the Home screen and operating
mode descriptions for information on this functionality.
In addition to the functionality provided by the Home
screen, the Status screen also provides material condi-
tioning information and control.
3A2175Z
Appendix C - ADM Run Screens Overview
Status Screen, Conditioning Control
This screen allows users to turn on and off heat zones
individually or all at once. The grey circles indicate that
a zone is off and green circles indicate that a zone is on.
When a zone is on it is actively controlling temperature.
To turn a single zone on/off:
1. Press to enter the Conditioning Control screen.
2. Use the arrows keys to navigate to the desired
zone.
3. Press to turn the selected zone on. When a
zone is on, the button will be selected. Press the
button again to turn the zone off.
To turn all zones on/off:
1. Press to enter the Conditioning Control screen.
2. Press the to turn on all zones. When all zones
are on, the button will be selected. Press the button
again to turn all zones off.
All zones shown for reference. Only four zones may
be active at one time.
81