Graco HFRL Setup And Operation Manual page 82

Appendix C - ADM Run Screens Overview
Mixer Run Screen (Voltex Option Only):
If the HFR detects the existence of a Voltex Dynamic
Mixer option, the following run screen will be available
to the right of the main home screen.
This screen enables the user to turn the mixer motor or
Air Nucleation On or Off without executing a dispense.
To turn On or Off the dynamic mixer motor, press the
" " key shown (shown ON in the image). To turn the
Air Nucleation , press the On or Off
in the image).
The screen also provides the capacity to disable the
mixer motor or Air nucleation during a dispense. To
disable the mixer during dispense, press the
(shown enabled on the screen image). To disable
Nucleation during dispenses, press the
enabled on the screen image).If the mixer motor is
disabled for dispensing, an "ECD0-R: Mixer Motor
Disabled for Dispense" event will be recorded on the
USB logs and the event run screen. Likewise, if
nucleation is disabled during a dispense, a "ECF0-R:
Mixer Air OFF for Dispense" event will be recorded in
the logs and run screen.
82
Errors Screens
This screen shows users a list of errors that have
occurred in the system. Each error entry includes a
description and error code along with a date and time
stamp. There are 5 pages, each holding 10 errors. The
50 most recent errors are shown.
Refer to the Troubleshooting section on page 51 for a
detailed description of all of the system errors.
Events Screens
This screen shows users a list of events that have
occurred in the system. Each event includes a descrip-
tion and event code along with a date and time stamp.
There are 20 pages, each holding 10 events. The 200
key (shown Off
most recent events are shown.
Refer to the Troubleshooting section on page 51 for a
detailed description of all of the system events.
key
key (shown
3A2175Z