Demounting 8X Periphery Modules - YASKAWA SLIO Manual

Basics and mounting
Demounting > Demounting 8x periphery modules

2.6.2 Demounting 8x periphery modules

Proceeding
Exchange of an electronic
module
32
1. Power-off your system.
2. For the exchange of a electronic module, the electronic module may be pulled for-
ward after pressing the unlocking lever at the lower side of the module.
3. For installation plug the new electronic module guided by the strips at the lower side
until this engages to the terminal module.
ð Now you can bring your system back into operation.
Easy Maintenance
'Easy Maintenance' means the support for adding and removing elec-
tronic modules during operation without having to restart the system. If
this is supported by your head module, you will find more detailed infor-
mation on this in the "Deployment" chapter.
nance' page 72
System SLIO
Ä Chap. 4.5.6 'Easy Mainte-
HB300 | IM | 053-1EC01 | en | 22-30