Table of Contents
Advertisement
System SLIO
HB300 | IM | 053-1EC01 | en | 22-30
4.
Turn all the locking lever of the bus coupler to be exchanged upwards.
5.
Pull the bus coupler forward.
6.
For mounting turn all the locking lever of the bus coupler to be exchanged upwards.
7.
To mount the bus coupler put it to the left periphery module and push it, guided by
the stripes, to the mounting rail.
8.
Turn all the locking lever downward, again.
9.
Plug again the electronic module, which you have removed before.
10.
Wire your bus coupler.
ð Now you can bring your system back into operation.
Basics and mounting
Demounting > Demounting bus coupler
31
Advertisement
Table of Contents
