Table of Contents
Advertisement
System SLIO
2.2.4 Hardware revision
Hardware revision on the
front
Hardware revision via web
server
2.3 Dimensions
CPU 01xC
HB300 | IM | 053-1EC01 | en | 22-30
n
The hardware revision is printed on every System SLIO module.
Since a System SLIO 8x periphery module consists of a terminal and electronic
n
module, you will find a hardware revision printed on each of them.
n
Authoritative for the hardware revision of a System SLIO module is the hardware revi-
sion of the electronic module. This is located under the labeling strip of the corre-
sponding electronic module.
n
Depending on the module type, there are the following 2 variants e.g. to indicate
hardware revision 1:
–
Current modules have a
–
With earlier modules, the 1 is marked with 'X' on a number grid.
1
X 2
1
3
4
On the CPUs and some bus couplers, you can check the hardware revision 'HW
Revision' via the integrated web server.
All dimensions are in mm.
on the front.
1
X 2
X 2
3
4
3
4
1
Basics and mounting
Dimensions
X 2
3
4
X 2
3
4
1
15
Advertisement
Table of Contents
