YASKAWA SLIO Manual page 12

Basics and mounting
System conception > Components
8x periphery modules
Terminal module
Electronic module
16x periphery modules
12
Each 8x periphery module consists of a terminal and an electronic module.
1 Terminal module
2 Electronic module
The terminal module serves to carry the electronic module, contains the backplane bus
with power supply for the electronic, the DC 24V power section supply and the staircase-
shaped terminal for wiring. Additionally the terminal module has a locking system for
fixing at a mounting rail. By means of this locking system your system may be assembled
outside of your switchgear cabinet to be later mounted there as whole system.
The functionality of a periphery module is defined by the electronic module, which is
mounted to the terminal module by a sliding mechanism. With an error the defective elec-
tronic module may be exchanged for a functional module with standing installation. At the
front side there are LEDs for status indication. For simple wiring each module shows cor-
responding connection information at the front and at the side.
Each 16x periphery module consists of an electronic unit and a terminal block.
1 Electronic unit
2 Terminal block
1
2
HB300 | IM | 053-1EC01 | en | 22-30
System SLIO