Figure 90: Defining The Restoration Properties - iTero Element 5D Plus User Manual

Figure 90: Defining the restoration properties

5. Select the following settings from the relevant drop-down lists. Settings marked with an asterisk are mandatory.
Initially, only the material selection is mandatory, but once the material has been selected, other settings become
mandatory depending on the material selected. In addition, the options in each setting change according to the
material selected.
Material: The material from which the restoration should be fabricated.
o
Preparation Design: The shape of the finishing line (margin line) created by the user during the preparation.
o
You can choose this for both the buccal and the lingual.
Margin Design: The type of ceramic-metal border relationship required for the selected metal-based crown.
o
You must choose this for both the buccal and the lingual. This is relevant only for metal dental work.
Shade System: The system used for choosing the shade of the restoration.
o
Incisal: The shade for the incisal area of the restoration.
l
Body: The shade for the body area of the restoration.
l
Gingival: The shade for the gingival area of the restoration.
l
Stumpf Shade: The shade of the prepped tooth.
o
82
iTero Element® 5D Plus User manual
© 2020 Align Technology, Inc. All rights reserved.