Technical Data - AEG IAE8488SFB User Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 33
Problem
Wrong language is set.
A cooking zone deactivates.
A warning message saying the
cooking zone is going to switch off
comes on.
and a message come on.
O - X - A appears.
blinks.
and a number come on.
You can hear a constant beep
noise.
Cookware heats up longer than 5
min.
9.2 If you cannot find a solution...
If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre. Give the data
from the rating plate. Make sure, you
operated the hob correctly. If not the

10. TECHNICAL DATA

10.1 Rating plate
Model IAE8488SFB
60
ENGLISH
Possible cause
You changed the language by mis‐
take.
Automatic Switch Off deactivates
the cooking zone.
Lock operates.
Child Lock operates.
There is no cookware on the zone.
The cookware is unsuitable.
The diameter of the bottom of the
cookware is too small for the zone.
There is an error in the hob.
The electrical connection is incor‐
rect.
The bottom of the cookware is not
induction compatible.
servicing by a service technician or dealer
will not be free of charge, also during the
warranty period. The information about
guarantee period and Authorised Service
Centres are in the guarantee booklet.
PNC 949 597 658 00
Remedy
Reset all functions to the factory set‐
tings. Select Reset All Settings from
the Menu.
Disconnect the hob from the electri‐
cal supply. After 1 min, connect the
hob again. Set Language, Display
Brightness and Buzzer Volume.
Deactivate the hob and activate it
again.
Refer to "Daily use".
Refer to "Daily use".
Refer to "Daily use".
Put cookware on the zone.
Use suitable cookware. Refer to
"Hints and tips".
Use cookware with correct dimen‐
sions. Refer to "Technical data".
Deactivate the hob and activate it
again after 30 seconds. If
on again, disconnect the hob from
the electrical supply. After 30 sec‐
onds, connect the hob again. If the
problem continues, speak to an Au‐
thorised Service Centre.
Disconnect the hob from the electri‐
cal supply. Ask a qualified electri‐
cian to check the installation.
Use cookware with correct (flat,
magnetic) bottom. Refer to "Hints
and tips".
comes

Advertisement

Table of Contents
loading

Table of Contents