Technical Data - AEG NIK85M00AZ User Manual

Problem
The indicator above the symbol
comes on.
The control bar blinks.
and a number come on.
10.2 If you cannot find a solution...
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre. Give the data from the rating
plate. Make sure, you operated the hob
correctly. If not the servicing by a service

11. TECHNICAL DATA

11.1 Rating plate
Model NIK85M00AZ
Typ 62 D5A 01 AA
Induction 7.2 kW
Ser.Nr. .................
AEG
11.2 Cooking zones specification
Cooking zone Nominal power
(maximum heat
setting) [W]
Left front 2300
Left rear 2300
Middle rear 2300
Right front 2300
106 ENGLISH
Possible cause
Child Safety Device or Lock oper‐
ates.
There is no cookware on the zone or
the zone is not fully covered.
The cookware is unsuitable.
The diameter of the bottom of the
cookware is too small for the zone.
There is an error in the hob.
technician or dealer will not be free of charge,
also during the warranty period. The
information about guarantee period and
Authorised Service Centres are in the
guarantee booklet.
PNC 949 598 162 00
220 - 240 V / 400 V 2N, 50 Hz
Made in: Germany
7.2 kW
PowerBoost [W]
3200
3200
3200
3200
Remedy
Refer to "Child Safety Device" and
"Lock".
Put cookware on the zone so that it
fully covers the cooking zone.
Use cookware suitable for induction
hobs. Refer to "Hints and tips".
Use cookware with correct dimen‐
sions. Refer to "Technical data".
Deactivate the hob and activate it
again after 30 seconds. If
on again, disconnect the hob from the
electrical supply. After 30 seconds,
connect the hob again. If the problem
continues, speak to an Authorised
Service Centre.
PowerBoost Cookware diame‐
maximum dura‐ ter [mm]
tion [min]
10 125 - 210
10 125 - 210
10 125 - 210
10 125 - 210
comes