AEG IAE8488SFB User Manual page 49

1. Insert the Food Sensor inside the food or
liquid up the minimum level mark.
2. Touch on the display to open the
Food Sensor menu and choose
Thermometer. You can also touch
Hob Functions > Thermometer.
3. Touch Start.
Measuring starts on the active cooking
zone.
If none of the cooking zones is active an
info pop-up window appears.
To stop the function, touch the digits
indicating the temperature or
Stop.
6.15 Melting
You can use this function to melt different
products, e.g. chocolate or butter. You can
use the function only for one cooking zone at
a time.
1. Touch on the display to open the
Menu.
2. Select Hob Functions > Melting from the
list.
3. Touch Start.
You need to select the desired cooking
zone.
If the cooking zone is already active a
pop-up window appears. Cancel the
previous heat setting to activate the
function.
To leave the Menu, touch
of the display, outside of the pop-up window.
To navigate through the Menu, use or .
To stop the function, touch the zone selection
symbol and then touch Stop.
6.16 Hob²Hood
It is an advanced automatic function which
connects the hob to a special hood. Both the
hob and the hood have an infrared signal
communicator. The speed of the fan is
defined automatically on the basis of the
mode setting and the temperature of the
hottest pot on the hob.
For most of the hoods the remote system is
originally deactivated. Activate it before you
use the function. For more information refer
to the hood user manual.
>
and select
or the right side
To operate the function automatically, set the
automatic mode to H1 - H6. The hob is
originally set to H5. The hood reacts
whenever you operate the hob. The hob
recognizes the temperature of the cookware
automatically and adjusts the speed of the
fan. You can set the hob to activate only the
light by selecting H1.
If you change the fan speed on
the hood, the default connection
with the hob is deactivated. To
reactivate the function, turn both
appliances OFF and ON again.
Mode Auto‐
Boiling 1)
matic
light
H0 Off Off
H1 On Off
3) On Fan speed 1
H2
H3 On Off
H4 On Fan speed 1
H5 On Fan speed 1
H6 On Fan speed 2
1) The hob detects the boiling process and acti‐
vates fan speed in accordance with the auto‐
matic mode.
2) The hob detects the frying process and acti‐
vates fan speed in accordance with the auto‐
matic mode.
3) This mode activates the fan and the light and
does not rely on the temperature.
Changing the modes
If you are not satisfied with the noise level /
fan speed, you can switch between modes
manually.
1. Touch .
Select Settings > Hob²Hood from the list.
2. Choose the appropriate mode.
To leave the Menu touch
of the display, outside of the pop-up window.
When you finish cooking and deactivate the
hob, the hood fan may still operate for a
Frying 2)
Off
Off
Fan speed 1
Fan speed 1
Fan speed 1
Fan speed 2
Fan speed 3
or the right side
ENGLISH 49