Changing The Scan Settings (Fax); Resolution Settings; Density Settings; 2-Sided Original Settings (Mf8380Cdw Only) - Canon 5119B001AA Basic Operation Manual

Changing the Scan Settings (Fax)

Resolution Settings

Fax mode screen
Specify destination.
01/01/2011 12:52AM
RX Mode: Auto
Resolution: 200 x 10
Press [ ] or [ ] to select <Resolution>.

Density Settings

Fax mode screen
Specify destination.
01/01/2011 12:52AM
Resolution: 200 x 1
+ -
Density: 0
Press [ ] or [ ] to select <Density>.

2-Sided Original Settings (MF8380Cdw only)

NOTE
The <2-Sided Original> mode is not available when
• scanning original using the platen glass
• scanning with the manual sending mode
Fax mode screen
Specify destination.
01/01/2011 12:52AM
Resolution: 200 x 1
2-Sided Original: O
Press [ ] or [ ] to select <2-Sided Original>.
Setting screen
Resolution
200 x 100 dpi (Norma
200 x 200 dpi (Fine)
200 x 200 dpi (Phot
200 x 400 dpi (Supe
<200 x 100 dpi (Normal)>
<200 x 200 dpi (Fine)>
<200 x 200 dpi (Photo)>
<200 x 400 dpi (Superfine)>
<400 x 400 dpi (Ultrafine)>
Setting screen
Density
-
...
[ ]
Decrease the density.
[ ]
Increase the density.
Setting screen
2-Sided Original
Off
Book Type
Calendar Type
...
...
<Off>
<Book Type>
<Calendar Type>
Specify the resolution.
Higher resolutions result in better image quality
but require longer transmission times.
...
...
For faxes that contain text
For faxes that contain fine text
For faxes that contain photographs
Achieves an even finer resolution than (Fine).
Achieves an even finer resolution than (Superfine).
Specify the density.
+
Specify the settings for scanning 2-sided
documents.
The setting for scanning 2-sided documents is not set.
Select when the orientation (top-to-bottom) of the
images on the front and back sides is the same.
Select when the orientation (top-to-bottom) of the
images on the front and back sides is different.
To next page
6-3