Canon 5119B001AA Basic Operation Manual page 160

Problem 1
Action
Problem 2
#853
Action
Problem 3
Action
Problem 1
Action
#861
Problem 2
Action
Problem
#863
Action
Problem
#995
Action
9-12
The job was not able to be processed due to the reason why it was canceled from an application or operating system while
the print data was being sent to this machine from a computer etc.
Check the settings, and then repeat the operation.
While performing the secure printing, the job has been canceled for running out of time to process.
Start over the job as necessary.
The job using the secure printing has been sent when <Secure Print Settings> is turned <Off>.
Set <Secure Print Settings> to <On>. Or send the job without the secure printing.
e-Manual → Security → Entering PIN for Printing (Secure Printing) → Setting Secure Printing
Cannot print because the print data was received from another printer driver.
Print the data again from the printer driver for the machine.
Printing cannot be performed because print data is broken.
Repeat the operation.
A process problem in the printer has occurred, and the machine does not operate properly.
Turn OFF the main power switch, wait for more than 10 seconds, and then turn it ON again.
If the problem is not solved, turn OFF the main power switch, disconnect the power cord, and contact your local authorized
Canon dealer or the Canon help line.
A document waiting to be sent or received has been canceled.
Try to send or receive the document again.