Changing the Fax Default Settings
You can change the default settings for the Fax function.
NOTE
•
The machine return to the Fax Default settings as follows:
- when you press [FAX] to switch to the Fax Standby mode
- when the machine finishes scanning documents
- when the Auto Clear function activates in the Fax mode
- when the registration/setting operation is finished
•
The Fax Default settings for the following modes are:
- Scan Density: <Standard>
- Image Quality: <Standard>
- Direct Sending: 'OFF'
- Stamp:
6
Additional
1
Functions
2
OK
6-4
Changing the Fax Default Settings
'OFF'
Press [Additional Functions].
Press [
] or [
press [OK].
] until <FAX SETTINGS> appears ➞