Performing A Scan Using A Shortcut Key - Canon 5119B001AA Basic Operation Manual

Shortcut Key Settings
Register
Confirm Destination
(2) Select the shortcut key that you want to register using [
[ ] and press [OK].
Select Shortcut Key
Scan
Scan
(3) Select the connection method using [
[OK].
Specify destination
Off
USB Connection
Network Connection
(4) Select the destination using [
• When a computer connected via a USB cable is included in
the displayed destinations:
The USB-connected computer is listed at the top.
• When only one computer is connected to the machine via a
USB cable:
This screen is not displayed.
• When more than 10 computers are connected to the machine
simultaneously:
Up to 10 computers can be displayed as a list of computers
connected to the machine. (Scanning cannot be performed
to the eleventh and subsequent computers. Reduce the
number of computers connected to the machine over the
network.)
e-Manual→Scanning→Scanning Paper Documents
and Saving Them to a Computer (USB & Network
Connection)→Registering the Scanner in MF Network Scan
Utility
(5) Specify the scan settings using [
Select Scan Type
Color Scan
B&W Scan
Custom 1
Custom 2
The scanner settings are specified by default as follows.
Color Scan Color
Black and
B & W Scan
white
Custom 1 Color
Custom 2 Color
7-4
PC1
PC2
] or [
] or [ ] and press [OK].
] or [ ] and press [OK].
Scan
Resolution File Type
Mode
Searchable/
300 dpi PDF
High
300 dpi TIFF –
300 dpi JPEG/Exif –
Searchable/
300 dpi PDF
Standard
To confirm the destination registered in the shortcut key:
(1) Select <Confirm Destination> using [
Shortcut Key Settings
] or
(2) Select the destination that you want to confirm using [
[ ] and press [OK].
Confirm Destination
] and press
4
Press [

Performing a Scan Using a Shortcut Key

Keys to be used for this operation
1
Place your document.
"Placing Documents" (→P.2-4)
"Supported Document Types" (→P. 2-2)
2
Press [
which the destination that you want to select is
registered.
Scanning starts.
When scanning cannot be performed
You cannot perform a scan while the MF Toolbox setup screen is
PDF Settings
displayed.
Click [
Register
Confirm Destination
USB Connedted PC
Color Scan
] (Menu) to close the menu screen.
OK
] (Scan > PC1 or Scan > PC2) into
] to close the screen before starting a scan.
] or [ ] and press [OK].
] or
Scan PC1
Scan PC2