When Loading Envelopes - Canon 5119B001AA Basic Operation Manual

● MF8380Cdw
● MF8080Cw
IMPORTANT
<Precautions when loading small size paper>
If the paper is curled, flatten the paper and load it. If you do not
flatten the paper, the printout may be printed askew or the images
may be printed skewed.
NOTE
When loading paper with a letterhead or logo
See "Paper Loading Orientation" (→P.2-15), and load the paper in the
proper orientation.

When loading envelopes

(1) Close the envelope flap.
(2) Place the stack of envelopes on a flat surface, flatten them
to release any remaining air, and be sure that the edges are
pressed tightly.
2-10
4
(3) Loosen any stiff corners of the envelopes and flatten curls as
shown in the figure.
(4) Align the edges of the envelopes on a flat surface.
(5) Load the envelopes into the paper cassette with the print side
up.
Align the paper guides securely against the edges
of the paper.
(1) Slide the side paper guides.
Holding the lock release lever, slide the paper guides to be
aligned with the width of the loaded paper.
● MF8380Cdw
(1)
● MF8080Cw
(1)
(1)
(2) Slide the paper guide at the front center.
Holding the lock release lever, slide the paper guides to be
aligned with the length of the loaded paper.
(1)