GMC Hummer H3 2008 Owner's Handbook Manual page 294

4. Remove the electrical connec-
tor by pushing the tab.
5. Pull the bulb socket out and
replace it with a new one.
6. Connect the electrical connec-
tor to the new bulb socket.
7. Re-install the bulb socket and
turn it clockwise to secure it.
Headlight aiming is important to
safe driving. See your dealer for
service.
Tail Lights, Stoplights, Back-Up
Lights and Rear Turn Signals
1. Open the swing-gate.
2. Remove the two screws from
the light assembly.
3. Pull the light assembly away
from the vehicle.
Section 4
4. Turn the bulb socket anti-
clockwise to remove it.
5. Grasp the socket firmly and
pull the bulb out.
6. Push the new bulb into the
socket until it clicks.
7. Insert the socket into the light
assembly and turn it clockwise
to secure it.
293 . . .