Table of Contents

Advertisement

Advertisement

Table of Contents
loading

Summary of Contents for GMC Hummer H3 2008

  • Page 2: Table Of Contents

    Owner's Handbook ® HUMMER Table of Contents How to Use this Handbook ......3 Important Safety Precautions ......5 Section 1 Instrumentation and Controls ..... 21 Section 2 Seats and Restraints ........133 Section 3 Starting and Operating Instructions ..177 Section 4 Service and Maintenance......
  • Page 3 Important Notes About this Handbook We thank you for choosing a Production waste is recycled, with Please be aware that the vehicle General Motors product, and we some of the waste material recov- you purchased may not be fitted want to assure you of our continu- ered for re-use.
  • Page 4: How To Use This Handbook

    How to Use this Handbook When it comes to service, keep in Use this handbook to learn about This handbook is divided into five mind that your dealer knows your the features of your new vehicle sections: vehicle best and is committed to and how they operate.
  • Page 5 How to Use this Handbook • Section 2: Seats and • Section 3: Starting and Oper- • Section 4: Service and ating Instructions Maintenance Restraints Once you have been familiar- The Service and Maintenance Next, focus on the centre of ised with your vehicle's instru- section: your vehicle: the seats and...
  • Page 6 How to Use this Handbook - contains information about • Section 5: Problems on the Each section begins with a brief tyre inflation, inspection, Road table of contents to help you locate the information you want. rotation and replacement This section tells you how to handle certain problems you - locates and describes your may have while driving.
  • Page 7: Important Safety Precautions

    Important Safety Precautions CAUTION AND NOTICE BOXES Safety Belts CAUTIONS and NOTICES alert you CAUTION to conditions that may result in injury, or that may damage your Always wear your safety belt. Be sure it is adjusted properly at all vehicle.
  • Page 8 Important Safety Precautions CAUTION (Continued) Wear your belt fitted closely against the body. Do not wear your shoulder belt under your arm. Make sure the belt is not twisted across your body. You could be seriously injured if your belt is buckled in the wrong place.
  • Page 9 Important Safety Precautions Air Bags CAUTION Both the safety belt restraint system and the air bag restraint system are designed to best protect adults. Anyone who is up against, or very close to, an inflating air bag could be seriously injured CAUTION CAUTION (Continued)
  • Page 10 Important Safety Precautions CAUTION (Continued) Air bags are designed to be used with the safety belts. Even with an air bag, if you are in a crash and not wearing a safety belt, your injuries could be much worse. If you are too close to an inflat- ing air bag, it could seriously Children and Safety Restraints injure you.
  • Page 11 Important Safety Precautions Leaving Your Vehicle CAUTION CAUTION (Continued) CAUTION A rear-facing child restraint in Infants who must use rear- the front seat could be pushed facing child restraints cannot Avoid leaving your vehicle while into the seatback by the front ride safely in passenger air bag- the engine is running.
  • Page 12 Important Safety Precautions CAUTION CAUTION (Continued) (Continued) It is very dangerous to leave • Be sure the shift lever is in P (Park) and the park brake is children inside the vehicle for firmly applied when you leave any extended period of time - your vehicle.
  • Page 13 Important Safety Precautions CAUTION CAUTION (Continued) (Continued) • Do not idle the engine in a • It can also be very dangerous closed-in place, such as the to drive with the boot, rear garage. Carbon monoxide windows, hatch or rear doors (CO) gas could get into your open.
  • Page 14 Important Safety Precautions Water and Your Vehicle CAUTION (Continued) CAUTION If you suspect that exhaust is entering your vehicle, drive After a car wash or driving with all the windows open, turn through a puddle, the brakes the air conditioning (if fitted) may not work well.
  • Page 15 Important Safety Precautions Driving on Hills Vehicle Loading CAUTION (Continued) CAUTION CAUTION Flowing or rushing water creates strong forces. If you try If you need to stop on a hill, do Do not load your vehicle in to drive through flowing water, not hold the vehicle there with excess of the Gross Vehicle as you might at a low water...
  • Page 16 Important Safety Precautions Fuel and Other Flammable CAUTION (Continued) Materials Do not put paper or flammable CAUTION items in an ashtray. They may catch fire from a cigarette. Turn off the engine before refuelling. To allow room for fuel expan- sion in the fuel tank (caused by When you open the fuel filler heat from the engine), fill the...
  • Page 17 Important Safety Precautions Batteries Towing Your Vehicle CAUTION (Continued) CAUTION CAUTION Every new GM vehicle uses a battery that requires no mainte- Vehicle batteries can hurt you. To help avoid injury to you or nance. However, if another They contain acid and electrici- others: battery has filler caps, be sure ty that can burn and gas that...
  • Page 18 Important Safety Precautions CAUTION CAUTION (Continued) Exercise extreme caution Under some conditions the around the electric engine fan. ethylene glycol in engine cool- It sometimes starts by itself, ant is combustible. To avoid even when the engine is not being burnt, do not spill cool- running.
  • Page 19 Important Safety Precautions Changing a Flat Tyre CAUTION (Continued) CAUTION Rust or dirt on the wheel, or on the parts to which it is fastened, Changing a tyre can cause inju- can make the wheel nuts ry. The vehicle can slip off the become loose after a time.
  • Page 20 Important Safety Precautions System Problems NOTICE CAUTION Additional electronic equip- ment, such as a CB radio, Driving with the brake warning mobile phone, navigation pack- light on can lead to an accident. age or two-way radio, may Have the brakes checked imme- interfere with the operation of diately if the brake warning your vehicle's engine, radio or...
  • Page 21 Important Safety Precautions Additional Safety Cautions CAUTION CAUTION (Continued) CAUTION Medical research shows that Unlocked doors can be danger- alcohol in a person's system can ous. Make sure to lock all doors Drinking and driving is very make crash injuries worse. This while riding in the vehicle.
  • Page 22 – Section 1 - Instrumentation and Controls Dash-Mounted Instruments and Controls ..25 Sound System and Clock......... 70 Instrument Cluster ..........27 Sound System with Compact Disc Player ..73 Clock .............. 73 Warning Lights..........30 Driver Information Centre .......41 Radio Controls ..........73 CD Player............
  • Page 23 Section 1 - Instrumentation and Controls Mirrors ............110 Storage ............129 Outside Mirrors..........110 Front Console Storage Compartment.... 129 Inside Day/Night Mirror ........111 Glove Box ............. 129 ® OnStar System Buttons (If fitted)....118 Cup Holders..........130 Vanity Mirrors (If fitted).........118 Convenience Nets......... 130 Rear Area Storage .........
  • Page 25: Instrumentation And Controls

    Instrumentation and Controls AUTO . . . 24...
  • Page 26: Dash-Mounted Instruments And Controls

    Section 1 ■ DASH-MOUNTED 5. Hazard Warning Flashers 10. Heater/Air Conditioner Switch INSTRUMENTS AND 11. Rear Window Wiper/Washer 6. System Status Indicators and Switch CONTROLS Controls 12. Gear Shift Lever 1. Air Vents 7. Main Light Controls 13. Accessory Power Outlets 2.
  • Page 27 Instrumentation and Controls . . . 26...
  • Page 28: Instrument Cluster

    Section 1 INSTRUMENT CLUSTER 1. High Beam Indicator The indicator light turns on The instrument cluster shown is when the headlights are set to typical. Your actual cluster may high beams. vary depending on the particular options included in your vehicle. 2.
  • Page 29 Instrumentation and Controls 4. Driver Information Centre 5. Trip Odometer Reset Button 6. Speedometer Display Press this button to set or reset The speedometer displays the Use the trip odometer reset Driver Information Centre fea- vehicle’s speed. button to scroll through the tures and to turn off or ac- The reading will be indicated following displays:...
  • Page 30 Section 1 See "Driver Information Centre 8. Tachometer Messages" later in this section The tachometer displays the for more information. engine speed in thousands of When the gauge first indicates revolutions per minute (RPM). empty there is still a little fuel NOTICE left, but you should refill the tank as soon as possible.
  • Page 31: Warning Lights

    Instrumentation and Controls 9. Gear Selector Position Warning Lights Your vehicle also has a Driver Infor- Indicator (Automatic mation Centre that works along Your vehicle has a number of Transmissions) with the warning lights and gaug- warning lights. es. See "Driver Information Centre" The indicator shows you what The warning lights go on when later in this section.
  • Page 32 Section 1 If you have a problem with the oil, CAUTION this light may stay on after you start the engine, or come on while Do not keep driving with low oil you are driving. This indicates that pressure. Your engine could oil is not going through the engine overheat and may catch on fire.
  • Page 33 Instrumentation and Controls Driving while this light is on could flatten your battery. If there is a problem with the battery charging system, a message will be displayed. See "Driver Information Centre Messages" later in this section. If you must drive a short distance with the light on, turn off all your accessories, such as the radio and Charging System Light...
  • Page 34 Section 1 If the light comes on while you are The light stays on until the ignition driving, pull over and stop is turned off or the park brake is fully released. carefully. The brake pedal may be harder to If it stays on after the park brake is push or it may go closer to the fully released, it means you may...
  • Page 35 Instrumentation and Controls A text message may also appear in If the light still stays on, or if it If the regular brake system warn- the Driver Information Centre comes on again while you're driv- ing light is also on, the vehicle display.
  • Page 36 Section 1 If it doesn’t come on, then have it NOTICE fixed so it will be ready to warn you if there is a problem. If you keep driving your vehicle with this light on, after a while, If it stays on or comes on while you your emission controls may not are driving, there may be a prob- work as well, your fuel economy...
  • Page 37 Instrumentation and Controls In order for your vehicle to pass an If the vehicle has been driven for NOTICE (Continued) inspection of its emission control several days (with a fully charged Modifications made to the equipment, the Malfunction Indi- battery) prior to the inspection, engine, transmission, exhaust, cator Light must be working prop- but the vehicle still does not pass...
  • Page 38 Section 1 The light may flash when you accelerate. This is normal. Ignore this light when you down- shift. Also ignore this light if your vehicle has four-wheel drive and the trans- fer case is in four-wheel low. Shift Indicator Light (Manual Traction Control System Light Transmission Only) This light should come on briefly...
  • Page 39 Instrumentation and Controls Whenever this light is on, the trac- The light may turn on for any of tion control system is off and will the following reasons: not limit wheel spin. • The traction control system The following messages will may have been turned off man- appear in the Driver Information ually using the traction control...
  • Page 40 Section 1 Safety Belt Reminder Light Passenger Safety Belt Reminder Air Bag Light Light See "Safety Belts" in Section 2 for The air bag light on your instru- information. The passenger safety belt reminder ment cluster flashes when you light is located on the instrument start the vehicle to indicate that panel.
  • Page 41 Instrumentation and Controls CAUTION If the air bag light stays on or comes on while you are driving, there may be a problem with this system. The air bags may not inflate in a crash, or they may inflate even when there hasn’t been a crash.
  • Page 42: Driver Information Centre

    Section 1 DRIVER INFORMATION To clear a message from the Driver Information Centre display, press CENTRE the trip odometer reset button. The Driver Information Centre Some messages may not be gives you the status of many of cleared until the problem is fixed. your vehicle’s systems.
  • Page 43: Driver Information Centre Displays

    Instrumentation and Controls Driver Information Centre Odometer Trip Odometer Displays The odometer shows how far your To view the trip odometer, press vehicle has been driven. the trip odometer reset button Press and release the trip odome- until the word TRIP appears on the ter reset button to scroll through The reading will be indicated in display.
  • Page 44 Section 1 Oil Life Monitor If the system is ever reset acciden- Language tally, change the oil at 5000 km After you change the oil, you need Your vehicle’s Driver Information (3,000 miles) since your last oil Centre display has a three- to reset the oil life monitor.
  • Page 45 Instrumentation and Controls 4. Press and hold the trip odom- You can scroll through and acti- Automatic Door Locks eter reset button until the next vate one of the following feature This feature allows you to custom- setting appears. settings: ise your automatic door locks to 5.
  • Page 46 Section 1 4. Repeat the previous step until You can scroll through and acti- • LOCK 2 the preferred setting appears. vate one of the following feature In an automatic transmission settings: vehicle, all doors automatically 5. Briefly press the trip odometer reset button to select the pre- •...
  • Page 47 Instrumentation and Controls • LOCK 3 Remote Lock/Unlock 4. Repeat the previous step until Confirmation the preferred setting appears. In an automatic transmission vehicle, all doors automatically This feature allows you to select 5. Briefly press the trip odometer lock when you shift out of feedback options for keyless entry reset button to select the pre- P (Park).
  • Page 48: Driver Information Centre Messages

    Section 1 You can scroll through and acti- Driver Information Centre • AC OFF vate one of the following feature Messages This message is displayed with settings: the ENG HOT message. These messages will appear if a • RFA 1 (remote function actua- problem is sensed in one of your The engine coolant tempera- tor 1)
  • Page 49 Instrumentation and Controls • ABS FAULT • CHANGE OIL • DOORS Appears when there is a prob- Appears when the life of the Appears when one or more of lem with the anti-lock brake engine oil has expired and the the doors or the bonnet is open system.
  • Page 50 Section 1 • FLUID • OIL • REDUCED POWER Appears when the ignition is Appears when the engine oil Appears when engine power is being reduced. on and the brake fluid level is pressure is low. low. Have the vehicle serviced See "Engine Oil Pressure Warn- This also can affect the vehicle’s as soon as possible.
  • Page 51 Instrumentation and Controls • SERV 4WD • SERVICE CHARG SYS • SERVICE STAB SYS Appears if there is a problem Appears if there is a problem Appears if your stability with the full-time four-wheel with the battery charging enhancement system is drive system.
  • Page 52 Section 1 • SERV VEH • TRAC OFF • TRACTION FAULT Have the vehicle serviced as Appears when the traction con- Appears if there is a problem trol system is turned off manu- with the Traction Control soon as possible. ally using the traction control System.
  • Page 53 Instrumentation and Controls • TURN SIGNAL LIGHTS SOUND SYSTEM AND CLOCK Appears with a chime if a turn The main light switch is on the signal is left on for more than instrument panel. See "Lights", See "Sound System and Clock", 1.2 km (3/4 mile).
  • Page 54: Hazard Warning Flashers Switch

    Section 1 PARK BRAKE The park brake handle is located near the left side of the steering wheel. The handle is used to set and release the park brake. See "Park Brake" in Section 3 for more information on how to prop- erly set and release the park brake.
  • Page 55: System Status Indicators And Controls

    Instrumentation and Controls To turn the rear wiper off, turn the SYSTEM STATUS • Passenger Air Bag On/Off control to 0. Indicator INDICATORS AND CONTROLS Press to wash and wipe the rear See "Passenger Sensing Sys- window. tem" in Section 2. The following indicators and The rear washer uses the same •...
  • Page 56: Traction Control System

    Section 1 ■ TRACTION CONTROL You may feel or hear the system working, but this is normal. SYSTEM Under certain conditions, the This system automatically limits system may operate on dry roads. wheel spin under slippery road When this occurs, a temporary conditions.
  • Page 57 Instrumentation and Controls Adjust your driving accordingly. When this warning light or the NOTE: message is on, the traction control Press the button again to turn the If your vehicle is in cruise system will not limit wheel spin. system back on. control when the traction Adjust your driving accordingly.
  • Page 58: Stabilitrak ® System

    Section 1 ■ STABILITRAK ® SYSTEM See "Driver Information Centre Messages" earlier in this section for This system selectively applies any more information. one of the brakes to help maintain When this message is displayed, directional control in difficult driv- the system is not operational and ing conditions.
  • Page 59: Accessory Power Outlets

    Instrumentation and Controls ■ ACCESSORY POWER When this message is displayed, NOTE: the system is not operational and OUTLETS If your vehicle is in cruise you should adjust your driving control when the Stabilitrak Outlets can be used to plug in accordingly.
  • Page 60 Section 1 When adding electrical equip- NOTICE NOTICE ment, be sure to follow the proper Leaving electrical equipment Adding some electrical equip- installation instructions included on for extended periods of time ment to your vehicle can with the equipment. can flatten your battery. damage it or keep other things NOTICE from working properly.
  • Page 61: Lights

    Instrumentation and Controls ■ LIGHTS Rotate the knob to to select one of four headlight levelling positions. Light’s Main Switch See the following, later in this The main light switch controls section, for more information: these light systems: • Headlight Levelling Control •...
  • Page 62 Section 1 When activated, this automatic Park Lights headlight feature turns your head- Rotate the knob to to turn on lights and other operating lights your park lights and other operat- on and off by sensing how dark it ing lights. The headlights will not is outside.
  • Page 63 Instrumentation and Controls Headlight Levelling Control The headlight levelling may be controlled manually. Rotate the knob to select one of four headlight levelling positions. Select the levelling position Instrument Panel Dimmer according to the vehicle load. Control • Rotate the knob to when The instrument light dimmer only the front seat is occupied.
  • Page 64: Fog Lights

    Section 1 Lights On Reminder Illuminated Exit If you open the driver’s door while When the key is removed from the the lights’ manual control is on ignition, some interior lights will and the ignition is off, you will hear turn on to illuminate your exit a warning chime.
  • Page 65: Dome Lights

    Instrumentation and Controls Dome Lights Reading Lights These lights come on automatical- Your vehicle may have reading ly when you open the doors. lights. These lights have on/off switches next to them. To turn the lights on manually, whether the doors are open or Press the switch to turn the lights closed, rotate the instrument light on and off.
  • Page 66: Heating And Air Conditioning System

    Section 1 ■ HEATING AND AIR CONDITIONING SYSTEM If your vehicle has the above system, here is how it works. 1. Air Temperature Selector Use this to change the temper- ature of the air coming through the system. Turn the temperature knob clockwise for warmer air or anti-clockwise for cooler air.
  • Page 67 Instrumentation and Controls 3. Air Outlet Selector Ventilation Heating Use this to change the air to direct airflow through to send most of the air delivery mode. the instrument panel outlets. through the floor ducts, and some through the windscreen and side This knob can be placed in any Blending window defroster vents.
  • Page 68 Section 1 Heating/Demisting to direct the air equally through the windscreen and side window defroster vents and through the heater outlets. Use this mode to remove mist from the windscreen or side windows while also heating the vehicle. Defrosting The A/C compressor may operate The A/C compressor may operate in this mode to dehumidify the air.
  • Page 69 Instrumentation and Controls A/C Compressor Button NOTE: Recirculation Press to turn the air condition- If you try to activate the air Press to recirculate the air in ing compressor on. conditioning compressor while your vehicle. This is useful for the climate control system is keeping dust and odours out or The indicator light should turn on.
  • Page 70: Operating Tips

    Section 1 When activated automatically, the Operating Tips Air Outlets recirculation feature cannot be Before using the air conditioning Angle the outlets up or down and turned off manually. system, open the windows for a turn the thumb-wheel under the If you try to activate or deactivate few minutes to permit hot air to outlet right or left to direct airflow...
  • Page 71: Rear Window Demister

    Instrumentation and Controls ■ SOUND SYSTEM AND NOTICE CLOCK Don’t use a razor blade or anything else that is sharp on CAUTION the inside of the rear window. Avoid or minimise any sound You could cut or damage the system activities while operat- warming grid.
  • Page 72 Section 1 Your vehicle may be fitted with NOTICE NOTICE one of the following sound Aftermarket sound equipment - Radio frequency interference systems: such as an audio system, a CD may be caused by equipment • Sound System with Compact player, a CB radio, mobile tele- (mobile phone chargers, vehi- Disc Player...
  • Page 73 Instrumentation and Controls The following pages describe the While your vehicle is parked, take CAUTION sound system in your vehicle, and the time to familiarise yourself with how to get the best performance the system controls and operation, Giving extended attention to from it.
  • Page 74: Sound System With Compact Disc Player

    Section 1 SOUND SYSTEM WITH COMPACT DISC PLAYER Clock To set the clock: • Press and hold to change the hour. • Press and hold to change the minutes. The clock may be set with the igni- tion on or off. Radio Controls Volume Control Rotate the top knob to the right to...
  • Page 75 Instrumentation and Controls Display Control Automatic Volume Control With this feature activated, the sound system will automatically Press DISP to recall the frequency This feature automatically adjust the volume so that it always of the station being played or to compensates for the increase in sounds the same to you.
  • Page 76 Section 1 Band Selection Press BAND to select AM, FM1 or FM2. The band currently selected is shown on the display. Tuning Rotate the knob to the right to go to a higher station and to the left to go to a lower station. Adjusting the Speakers After choosing the desired speaker (information button)
  • Page 77 Instrumentation and Controls To quickly set the speaker controls Manual Tone Adjustment You will hear one beep. to their middle positions, press Press the knob repeatedly to To quickly set all speaker and tone and hold the knob while a speaker choose the BAS (bass), BASS, TRE controls to their middle positions, control is displayed.
  • Page 78 Section 1 Equalisation Settings Press AUTO EQ to select custom- ised equalisation settings. This feature has settings for the following types of music or stations: pop, rock, jazz, classical, country and talk. To return tone control to the manual mode, press and release Station Seeking Station Scanning knob until MANUAL...
  • Page 79 Instrumentation and Controls Press the button again or press one Preset Station Scanning Presetting Stations of the preset push-buttons to stop Press and hold either SEEK arrow The station preset push-buttons let this function. for more than four seconds until you choose and set favourite The radio will only scan to stations you hear a double beep and PSC...
  • Page 80 Section 1 4. Press and hold one of the push-buttons until you hear a beep. Whenever you push that button again, the preset station will return. The equalisation setting stored for the station will be automat- ically chosen whenever you se- lect the preset station.
  • Page 81: Cd Player

    Instrumentation and Controls CD Player A disc symbol will appear on the NOTICE display whenever a disc is inserted. This player is not a CD changer. Do not apply paper labels to The track number also appears You may load only one disc at a discs.
  • Page 82 Section 1 Fast Forwarding/Rewinding Press either SEEK arrow for more than two seconds to move quickly ahead or back to another part of the disc. Release it to return to playing speed. The system will advance or reverse at a rate of two tracks per second. Seeking If the track has been playing for under eight seconds, the player...
  • Page 83 Instrumentation and Controls Random Playback Equalisation Settings Source Selection Press (random) to play the Press AUTO EQ repeatedly to Press BAND to stop playing the tracks randomly rather than in choose one of several preset equal- disc and switch to the radio. sequence.
  • Page 84: Sound System With 6-Disc Cd Changer

    Section 1 SOUND SYSTEM WITH 6- DISC CD CHANGER Clock To set the clock: • Press and hold to change the hour. • Press and hold to change the minutes. The clock may be set with the igni- tion on or off. Radio Controls Volume Control Rotate the top knob to the right to...
  • Page 85 Instrumentation and Controls Display Control Automatic Volume Control With this feature activated, the sound system will automatically Press DISP to recall the frequency This feature automatically adjust the volume so that it always of the station being played or to compensates for the increase in sounds the same to you.
  • Page 86 Section 1 Band Selection Press BAND to select AM, FM1 or FM2. The band currently selected is shown on the display. Tuning Rotate the DISP knob to the right to go to a higher station and to the left to go to a lower station. (information button) This feature is not operable in This feature is not operable in...
  • Page 87 Instrumentation and Controls Adjusting the Speakers To quickly set the speaker controls Manual Tone Adjustment to their middle positions, press Press the knob repeatedly to Press the knob repeatedly to and hold the knob while a speaker choose the BAL, FAD or FADE choose the BAS (bass), BASS, control is displayed.
  • Page 88 Section 1 You will hear one beep. To quickly set all speaker and tone controls to their middle positions, do not select a control. Just press and hold the knob when no tone or speaker control is displayed. You will hear one beep. CEN or ALL CENTERED will appear on the display.
  • Page 89 Instrumentation and Controls Preset Station Seeking Station Scanning Preset Station Scanning Press the 1-6 button to seek To scan stations, press and hold Press and hold either SEEK arrow through the stations that are the left or right SEEK arrow for two for more than four seconds until preset on the radio’s push- seconds until you hear a beep.
  • Page 90 Section 1 Presetting Stations The station preset push-buttons let you choose and set favourite stations. Each of the push-buttons can be set to program one AM, one FM1 and one FM2 station: 1. Press BAND to select AM, FM1 or FM2. 2.
  • Page 91: 6-Disc Cd Changer

    Instrumentation and Controls Error Messages 6-Disc CD Changer When playing CDs recorded at home (CD-R), the sound quality If CAL ERR (calibration error) This compact disc player can may be reduced. There may be appears on the display, then the accommodate up to six compact increased skipping, difficulty in radio has not been properly cali-...
  • Page 92 Section 1 LOADING THE CD CHANGER To load two or more compact NOTICE discs: To load one compact disc: Do not apply paper labels to 1. Turn on the ignition. 1. Turn on the ignition. discs. The labels may get 2.
  • Page 93 Instrumentation and Controls 3. When the light to the right of 4. When you are done loading TO PLAY A LOADED DISC: the CD slot stops flashing and discs, press LOAD to cancel For every disc that is loaded into turns green, and INSERT CD # the loading function.
  • Page 94 Section 1 Fast Forwarding/Rewinding Seeking Scanning Press and hold the Push the right arrow on the SEEK Press and hold either SEEK arrow for more than two seconds (until button to move quickly ahead or button to move quickly to the back to another part of the disc.
  • Page 95 Instrumentation and Controls Repeating Discs or Tracks Random Playback Equalisation Settings Press (repeat) to listen to a Press (random) to play the Press AUTO EQ to select custom- selection again. The current selec- tracks randomly rather than in ised equalisation settings. tion will continue to repeat.
  • Page 96 Section 1 Display Control Source Selection Once the disc is removed, the light will begin flashing again and Press DISP to display the track Press BAND to stop playing the another disc will eject. elapsed time. disc and switch to the radio. To stop ejecting discs, press the To change what is normally shown Press...
  • Page 97 Instrumentation and Controls SONG LIST MODE 3. Press a numbered push-but- To play the song list, press ton to select a disc, then seek This feature can save up to 20 You will hear one beep. to the desired track. tracks in memory.
  • Page 98 Section 1 To delete individual tracks from 4. Press and hold for at least To delete all tracks from the Song the Song List: two seconds. List: 1. Make sure that the CD player When the song list button is 1.
  • Page 99: Disc Error

    Instrumentation and Controls 3. Press and hold for at least DISC ERROR Do not add paper labels to discs. four seconds. They could get caught in the If CHECK CD appears and/or the compact disc player. When the song list button is disc comes out, it means there is first pressed, you will hear one If any error occurs repeatedly or if...
  • Page 100: Care Of Your Compact Disc Player

    Section 1 CARE OF YOUR COMPACT CARE OF YOUR COMPACT Be sure never to touch the signal surface when handling discs. Pick DISC PLAYER DISCS up discs by grasping the outer The use of CD lens cleaners is not Handle discs carefully. Store them edges or the edge of the hole and advised.
  • Page 101: Anti-Theft Feature

    Instrumentation and Controls ANTI-THEFT FEATURE ANTENNA If the mast becomes slightly bent, you can straighten it by hand. The The theft deterrent feature is auto- The fixed mast antenna is mast antenna can be replaced if matically enabled and therefore no designed to withstand most car severely bent.
  • Page 102: Controls Mounted On Steering Wheel/Column

    Section 1 ■ CONTROLS MOUNTED ON STEERING WHEEL/ COLUMN You will find the following controls mounted on the steering wheel or steering column. AUTO Multi-function Lever Use this lever to control your turn signals, windscreen wipers, cruise control, and headlight high/ low beams.
  • Page 103: Multi-Function Lever

    Instrumentation and Controls ■ MULTI-FUNCTION LEVER Turn Signal To signal a turn, move the lever all the way up (right) or down (left). When the turn is over, the lever will return automatically. To signal a lane change, just raise or lower the lever until the arrow starts to If a bulb is burnt out, replace it to If a turn signal is left on for more...
  • Page 104: High-Low Beam Control

    Section 1 Pull the lever back to the centre position to return to low beams. You may be able to flash your high beams to signal other drivers. To do this, pull the multi-function lever toward you. Then release the lever. When the high beams are on, an indicator light on the instrument High-Low Beam Control...
  • Page 105 Instrumentation and Controls With cruise control, you can main- tain a speed of about 40 km/h (25 mph) or more without keeping your foot on the accelerator pedal. Cruise control will not work if the park brake is set or if the master cylinder brake fluid level is low.
  • Page 106 Section 1 To Go Back to Your Set Speed If you have temporarily turned off cruise control without erasing the set speed memory, do the follow- ing to re-engage cruise control: • Once you're going about 40 km/h or more, you can move the cruise switch briefly to the right, resume/accelerate position.
  • Page 107 Instrumentation and Controls To Go to a Higher Speed • Move the switch to the To Go to a Slower Speed resume/accelerate position. To go to a higher speed, do any of • Push in the button at the end You can hold it there while the the following: of the lever and hold it in.
  • Page 108: Windscreen Wipers

    Section 1 To Pass Another Vehicle When Using Cruise Control on Hills You’re in Cruise Control How well the cruise control system Just use the accelerator pedal will work on hills depends on when you need more speed. When several factors: you take your foot off the pedal, •...
  • Page 109 Instrumentation and Controls The wipers are protected by a circuit breaker and a fuse. If there is an electrical overload, the wiper system will stop until the motor cools. Wiper blades will eventually wear out and not wipe properly, reduc- ing forward vision.
  • Page 110 Section 1 Rear Wiper/Washer CAUTION Your vehicle is fitted with a rear Don’t use the washer fluid in wiper for the rear window. freezing weather until your See "Rear Wiper/Washer" earlier in windscreen is warmed so that this section for more information. ice doesn’t form and block your vision.
  • Page 111: Mirrors

    Instrumentation and Controls ■ MIRRORS Manual Folding Mirrors Your vehicle is fitted with folding Outside Mirrors outside mirrors. You should fold the mirrors inward to prevent Adjust the outside mirrors so that a damage when going through a car little of the vehicle and the area wash or narrow streets.
  • Page 112: Inside Day/Night Mirror

    Section 1 Inside Day/Night Mirror This feature comes on automati- Temperature Display cally with each ignition cycle. To turn the dual display on or off, The mirror pivots so that you can The indicator light near the on/off press and release the button.
  • Page 113 Instrumentation and Controls Compass Operation There may be a strong magnetic Compass Calibration field (from various magnetic To turn the dual display on or off, The compass is self-calibrating, objects on the vehicle) interfering press and release the button. but if C or CAL appears, or if the with the compass.
  • Page 114 Section 1 To adjust for compass variance: 1. Find your current location and zone number on the variance zone map. 2. With the ignition on and the engine off, press and hold the button for several seconds until ZONE or a zone number appears in the display.
  • Page 115 Instrumentation and Controls AUTOMATIC INSIDE DAY/ This feature comes on automati- Do not spray glass cleaner directly NIGHT MIRROR WITH COMPASS cally with each ignition cycle. onto the mirror. Use a dampened AND TEMPERATURE DISPLAY cloth or paper towel to clean the The indicator light near the on/off (COMPASS/TEMPERATURE mirror.
  • Page 116 Section 1 Temperature Display • If the vehicle has been off for Compass Operation more than two and a half hours To turn the dual display on or off, To turn the dual display on or off, or the last stored temperature press and release the button.
  • Page 117 Instrumentation and Controls See "Compass Calibration" later in Compass Calibration • When it is safe to do so without this section for more information. disturbing other drivers, slowly The compass is self-calibrating, drive your vehicle in a 360° cir- The compass may also need cali- but if C or CAL appears, or if the cle at a speed of 8 km/h bration if it displays an incorrect...
  • Page 118 Section 1 To adjust for compass variance: 1. Find your current location and zone number on the variance zone map. 2. With the ignition on and the engine off, press and hold the button for several seconds until ZONE or a zone number appears in the display.
  • Page 119: Onstar ® System Buttons (If Fitted)

    Instrumentation and Controls ■ WINDOWS ® OnStar System Buttons (If CAUTION (Continued) fitted) CAUTION Do not leave children in the The inside rear-view mirror in your vehicle with the ignition key. Leaving children, helpless vehicle may be fitted with OnStar They could operate the power adults, or pets in a vehicle with system buttons.
  • Page 120: Power Windows

    Section 1 Press the front part of a switch to Express Down Feature open a window as desired. The driver's window switch is fitted with an Express Down feature. The To raise the window, pull up on the front of the switch. window can be opened a small amount by tapping the front part The power windows are protected...
  • Page 121: Doors

    Instrumentation and Controls ■ DOORS CAUTION (Continued) CAUTION • Young children who get into unlocked vehicles may be Unlocked doors can be unable to get out. A child dangerous. could be overcome by • Passengers - especially chil- extreme heat and could suffer dren - can easily open the permanent injuries or even doors and fall out of a moving...
  • Page 122: Power Door Locks

    Section 1 Anti-lockout Feature This feature helps protect you from locking your keys in the vehicle. If the power door lock switch is pressed while a door is open and the key is in the ignition, all the doors will lock and the driver’s door will unlock.
  • Page 123: Rear Door Security Lock

    Instrumentation and Controls Programmable Automatic Door Security Lock Activation Locks To activate this feature, use the This feature allows you to custom- ignition key to turn the rear door ise your automatic door locks to security lock toward the front of suit your needs.
  • Page 124: Rear Cargo Area

    Section 1 Rear Area Storage CAUTION Your vehicle may be fitted with a Driving with the swing-gate storage compartment located on open could injure pedestrians the right side of the rear cargo or damage the vehicle. Make area. sure the swing-gate is To open the storage compart- completely closed before ment, pull the two tabs out and...
  • Page 125: Jack And Spare Tyre Removal

    Instrumentation and Controls Convenience Net (If fitted) Cargo Cover (If fitted) Jack and Spare Tyre Removal This net, which may be installed in NOTICE the rear area, is designed to The jack is located in the rear area prevent small things, such as Do not put items on top of the of your vehicle.
  • Page 126: Overhead Area And Roof

    Section 1 ■ OVERHEAD AREA AND Sun Roof (If fitted) ROOF NOTICE Sun Visors Make sure not to leave the sun roof open for long periods of To block out glare, pull the sun time. Debris may collect in the visor down or to the side.
  • Page 127 Instrumentation and Controls Sun Shade Anti-Pinch Feature The sun shade opens automatical- If a head, hand or another object is ly when the sun roof is opened. in the way of the sun roof as it is closing, the glass panel will stop The sun shade will remain open and open to the pre-set comfort until you close it manually.
  • Page 128: Cargo Tie-Downs (If Fitted)

    Section 1 Cargo Tie-Downs (If fitted) Luggage Carrier Do not overload the vehicle. See "Vehicle Loading" in Section 3. There are four cargo tie-downs The luggage carrier has side rails located in tracks on the roof of the and may have moveable cross-rails vehicle.
  • Page 129 Instrumentation and Controls To move the cross-rails, do the 2. Remove both end caps. 3. Pull the lever at each end of following: the cross-rail from left to right to loosen the cross-rail. 1. Turn the key (included with this system) anti-clockwise to 4.
  • Page 130: Storage

    Section 1 ■ STORAGE 5. Push the lever at each end of Glove Box the cross-rail from right to left Your vehicle has many storage The glove box can be used to store to lock the cross-rail in place. compartments. small items.
  • Page 131: Cup Holders

    Instrumentation and Controls Cup Holders Convenience Nets Rear Area Storage There are two cup holders at the Your vehicle is fitted with storage See "Rear Cargo Area" earlier in front of the centre console. nets located on the back of the this section.
  • Page 132: Ashtray And Lighter (If Fitted)

    Section 1 ■ ASHTRAY AND ■ RETAINED ACCESSORY To use the cigarette lighter, push it in and wait for it to pop out. LIGHTER (IF FITTED) POWER The ashtray is removable and fits in NOTICE Your vehicle has retained accesso- the front cup holder.
  • Page 133: Battery Run-Down Protection

    Instrumentation and Controls ■ BATTERY RUN-DOWN ■ ELECTRIC POWER See the following, earlier in this section, for more information: PROTECTION MANAGEMENT • Charging System Light This feature is designed to protect This system monitors the tempera- • Driver Information Centre your vehicle’s battery.
  • Page 134 –– Section 2 - Seats and Restraints Seat Controls ..........134 Supplemental Restraints ....... 151 Manual Seat Controls (If fitted) .....134 Safety Belt Pre-tensioners ......151 Air Bag System ..........151 Power Seat Controls (If fitted) .......134 Front Seatback Manual Reclining Control..135 Passenger Sensing System......
  • Page 135: Seats And Restraints

    Seats and Restraints CAUTION Do not adjust the driver’s seat when the vehicle is moving. The seat could jerk and cause a loss of control. ■ SEAT CONTROLS Power Seat Controls (If fitted) Manual Seat Controls (If The power seat controls are locat- fitted) ed on the outboard sides of the front seats.
  • Page 136: Front Seatback Manual Reclining Control

    Section 2 Front Seatback Manual CAUTION Reclining Control Do not adjust the driver’s seat when the vehicle is moving. CAUTION The seat could jerk and cause a LUMBAR Do not adjust the driver’s seat loss of control. when the vehicle is moving. The seat could jerk and cause a loss of control.
  • Page 137: Heated Seats (If Fitted)

    Seats and Restraints CAUTION Sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your seatbelts can’t do their job when the seatback is excessively reclined. Lift the lever located on the Heated Seats (If fitted) outboard side of the seat cushion Use this feature to heat the seat-...
  • Page 138: Head Restraints

    Section 2 To turn this feature off, move the switch to the centre, off position. The front passenger’s safety belt must be fastened in order for the heated seat feature to work on the passenger’s seat. The last heated seat setting will be recalled at each ignition cycle.
  • Page 139: Rear Seats

    Seats and Restraints Rear Seats NOTICE Your vehicle has a split rear seat Damage to the rear seat or safe- which can be folded down for ty belts can occur if the seat is additional cargo space. folded with the safety belts fastened.
  • Page 140 Section 2 Unfolding the Seat CAUTION A seat that is not locked in place properly could move during a sudden stop or collision. People in the vehicle could be injured. Make sure the seat is locked in place. 2. Pull the cushion forward until 3.
  • Page 141: Safety Belts

    Seats and Restraints 1. To raise the seatback, just lift CAUTION (Continued) up the seatback and push it until it locks in the upright • Seatbelts should be adjusted as firmly as possible, consist- position. ent with comfort, to provide 2.
  • Page 142 Section 2 CAUTION CAUTION CAUTION (Continued) • Belts should not be worn with The driver and all passengers It is extremely dangerous to straps twisted. must be properly restrained at ride in a cargo area, inside or all times with the safety belts outside of a vehicle.
  • Page 143: Lap/Shoulder Belt

    Seats and Restraints The safety belt information includ- Be sure that if children are too ed here is intended for vehicle small to be well restrained by the occupants of adult size and for safety belt system, that they are older children who have outgrown secured in an appropriate child booster seats.
  • Page 144 Section 2 3. Pull the belt across you. Do 5. Pull up on the latch plate to CAUTION not let it get twisted. make sure it is secure. You could be seriously injured if The lap/shoulder belt may lock 6. Adjust the shoulder belt away your belt is buckled in the if you pull it out very quickly.
  • Page 145 Seats and Restraints The safety belt locks if there is a sudden stop or crash. When you pull the shoulder portion of some rear passenger lap/shoulder belts all the way out, the child restraint locking feature is engaged. The belt can no longer be pulled out until it is fully retracted.
  • Page 146 Section 2 The shoulder belt should not cross the face or neck. CAUTION The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones, and you would be less likely to slide The lap/shoulder belt should be Shoulder Belt Height Adjuster...
  • Page 147 Seats and Restraints To move the height adjuster up, Shoulder Belt Comfort Guides just push up on the shoulder belt Your vehicle is fitted with rear guide. shoulder belt guides which Maladjustment of the safety belt provide comfort and support for height could reduce the effective- some adults and children.
  • Page 148 Section 2 To remove the comfort guide: 1. Squeeze the belt edges together and remove the belt from the comfort guide. 2. Pull the comfort guide upward to expose the storage clip. 3. Slide the comfort guide back onto its storage clip. 4.
  • Page 149: Replacing Safety Belts

    Seats and Restraints Replacing Safety Belts If you have been in a collision CAUTION where the belts may have been CAUTION A crash can damage the stretched, or if the safety belt is cut restraint systems so that they or damaged, the belt needs to be Care should be taken to avoid do not provide proper protec- replaced.
  • Page 150: Safety Belt Use During Pregnancy

    Section 2 Your vehicle is fitted with safety The best way to protect the foetus belt pre-tensioners for the driver is to protect the mother. When a safety belt is worn properly, it is and front passenger. Pre-tension- ers work only once. If the pre- more likely that the foetus will not tensioners were activated in a colli- be hurt in a crash.
  • Page 151: Safety Belt Reminder Light

    Seats and Restraints If the passenger air bag is enabled when you start the vehicle, after several seconds, a chime will come on for several seconds to remind the front passenger to fasten their safety belt. The passenger safety belt light will also come on and stay on for several seconds, and then it will flash for several seconds more.
  • Page 152: Supplemental Restraints

    Section 2 ■ SUPPLEMENTAL SAFETY BELT PRE- TENSIONERS RESTRAINTS Your vehicle is fitted with safety CAUTION belt pre-tensioners. Pre-tensioners help tighten the safety belts A crash can damage the during the early stages of a moder- restraint systems in your vehi- ate to severe frontal, near frontal cle.
  • Page 153 Seats and Restraints These are dual-stage frontal air When an air bag inflates, the doors bags which adjust the amount of may automatically unlock. The restraint according to crash severi- interior lights and the hazard ty. For moderate frontal impacts, warning flashers may also turn on.
  • Page 154 Section 2 CAUTION CAUTION CAUTION Both the safety belt restraint If you are too close to an inflat- A child in a rear-facing child system and the air bag restraint ing air bag, it could seriously restraint in the front passenger system are designed to best injure you.
  • Page 155 Seats and Restraints CAUTION CAUTION CAUTION (Continued) Although your vehicle is fitted If, however, you secure a Do not attach anything to the with a passenger air bag deacti- forward-facing child restraint in area from where the air bag vation feature which is the front passenger seat, be inflates.
  • Page 156 Section 2 In many severe crashes, wind- CAUTION CAUTION (Continued) screens are broken by vehicle Do not secure anything to the When an air bag inflates, there deformation. Additional wind- roof of your vehicle by routing may be dust in the air. This dust screen breakage may also occur rope or tie-downs through any could cause breathing prob-...
  • Page 157 Seats and Restraints CAUTION CAUTION Do not damage the air bag For up to ten seconds after the covers. ignition is turned off and the battery is disconnected, an air If an air bag cover is damaged, bag can still inflate during you may have to replace the air improper service.
  • Page 158: Passenger Sensing System

    Section 2 NOTE: When the system self-check is complete, one of the indicators The driver's frontal air bag and will stay on to indicate whether the the roof-mounted side-impact front passenger’s frontal air bag is air bags are not part of this on or off.
  • Page 159 Seats and Restraints The passenger sensing system will It is important to note that for turn off the passenger frontal air some children who have out- bag under the following grown child restraints and for conditions: very small adults, the system may or may not turn off the air •...
  • Page 160 Section 2 Aftermarket equipment, such as SYSTEM OPERATION WITH A seat covers, seat heaters and seat CHILD RESTRAINT massagers can affect the perform- CAUTION ance of the passenger sensing system. Avoid using aftermarket Accident statistics show that equipment if your vehicle is fitted children are safer if they are with this system.
  • Page 161 Seats and Restraints CAUTION Although your vehicle is fitted with a passenger air bag deacti- vation feature which is designed to turn off the passen- ger’s air bag under certain conditions, no system is fail- safe. No one can guarantee that an air bag will not deploy under some unusual circumstance, CAUTION...
  • Page 162 Section 2 CAUTION CAUTION (Continued) If, however, you secure a If the "on" indicator still forward-facing child restraint in appears, secure the restraint in the front passenger seat, be a rear seat position and have sure to move the front passen- your vehicle serviced as soon as ger seat as far back as it will go.
  • Page 163 Seats and Restraints To maintain the correct seating Make sure the passenger sits in an position, especially during vehicle upright position, centred on the manoeuvres and braking, the seat cushion with his/her legs passenger should wear the safety comfortably extended. belt.
  • Page 164 Section 2 If the two indicators never appear CAUTION when the vehicle is first started, or if after several seconds both indica- When the vehicle is started with tors remain lit, there may be a a child restraint installed in the problem with the system.
  • Page 165 Seats and Restraints See "System Operation with a CAUTION CAUTION (Continued) Child Restraint" earlier in this A child in a rear-facing child Although your vehicle is fitted section for additional important restraint in the front passenger with a passenger air bag deacti- safety information.
  • Page 166: Child Restraints

    Section 2 CAUTION CAUTION (Continued) After installing a child restraint If a child cannot see out of the in the rear seat, pull the shoul- window, do not raise him/her der belt all the way out of the by means of an ordinary cush- retractor to set the lock.
  • Page 167 Seats and Restraints CAUTION An unsecured child restraint may be tossed about the vehi- cle in a collision or sudden stop. You or your passengers could be injured. Secure the child restraint properly even if a child is not using the restraint. CAUTION Child restraint anchorages are designed to withstand only...
  • Page 168 Section 2 The restraint manufacturer’s These restraints use the safety belt CAUTION instructions should state the system in your vehicle, but the weight and height limitations for The body structure of a young child also has to be secured within the particular restraint.
  • Page 169 Seats and Restraints When you pull the shoulder Push and pull the child restraint in CAUTION portion of the rear passenger lap/ different directions to make sure it shoulder belts all the way out, the is secure. Accident statistics show that child restraint locking feature is children are safer if they are Child restraints that require the...
  • Page 170 Section 2 CAUTION Although your vehicle is fitted with a passenger air bag deacti- vation feature which is designed to turn off the passen- ger's air bag under certain conditions, no system is fail- safe. No one can guarantee that an air bag will not deploy under some unusual circumstance, CAUTION...
  • Page 171 Seats and Restraints Many child restraints are too wide CAUTION CAUTION (Continued) to be properly secured in a centre If, however, you secure a When the vehicle is started with rear seat, although some will fit forward-facing child restraint in a child restraint installed in the there.
  • Page 172 Section 2 OLDER CHILDREN To determine whether a child is • With the child sitting all the ready to transition out of a boost- way back on the seat, with Older children who have er, into a rear seat, check your local knees bent at the seat edge, outgrown booster seats should sit laws and check the following:...
  • Page 173 Seats and Restraints • Does the lap belt fit low and • Can the proper safety belt fit The shoulder belt should not cross snug on the hips, touching the be maintained for the duration the face or neck. thighs? of the trip? The lap part of the belt should be If you answered "yes"...
  • Page 174 Section 2 TOP STRAP CAUTION A child restraint may have a top In a crash, a vehicle occupant strap. who is not restrained properly Some top strap-fitted child could become airborne and restraints are designed for use with strike and injure another person or without the top strap being in the vehicle, or could be eject- anchored.
  • Page 175 Seats and Restraints CAUTION CAUTION Do not install a child restraint Each top strap anchor fitting is using only the top strap anchor designed to anchor only one fitting. child restraint. Attaching more than one child restraint to a Make sure that the child single anchor fitting could restraint is properly installed, cause the anchor fitting to...
  • Page 176 Section 2 • If the seat does not have a head • If the seat has a fixed head • If the seat has a fixed head restraint, route the top strap restraint and the child restraint restraint and the child restraint directly over the seatback.
  • Page 178 ––– Section 3 - Starting and Operating Instructions Star New Vehicle Run-In Period ......179 Off-road driving ..........205 ting Keys..............179 Before You Go Off-Roading ......205 ® Side Steps (If fitted)........206 PASS-Key III Plus System......180 Theft Deterrent System.........183 Loading Your Vehicle for Off-Road Driving ..207 Environmental Concerns .......
  • Page 179 Section 3 - Starting and Operating Instructions Vehicle Parking ..........223 Suspension............. 232 Automatic Transmission (If fitted)....224 Vehicle Loading ..........233 Manual Transmission (If fitted) ......226 Tyre and Loading Information Label....234 Traction............226 Certification Label ......... 234 Traction Control System........226 Trailer Towing ..........235 ®...
  • Page 180: New Vehicle Run-In Period

    Section 3 ■ NEW VEHICLE RUN-IN ■ KEYS NOTICE (Continued) PERIOD CAUTION • Avoid making hard stops for the first 320 km (200 miles) NOTICE Do not leave children in the or so. Hard stops with new vehicle with the ignition key. Your vehicle doesn’t need an brake linings can mean pre- They could operate the power...
  • Page 181: Starting And Operating Instructions

    Starting and Operating Instructions ® The vehicle comes with two PASS-Key III Plus System NOTICE double-sided keys which are used Your vehicle is fitted with a for the ignition and the driver's Theft prevention features can Personalised Automotive Security door lock cylinder. make it difficult to get into your ®...
  • Page 182 Section 3 In order to discourage vehicle If you're ever driving and the Secu- PROGRAMMING ADDITIONAL theft, the system will not allow the rity System Light comes on and KEYS stays on, you may have a problem. starter and fuel circuits to operate Any new key must be if a damaged or wrong key has The engine will restart, but your...
  • Page 183 Starting and Operating Instructions You can program up to ten addi- 3. Turn off the ignition and If all of your ignition keys are lost tional keys with the two original remove the key. or damaged, see your dealer or a keys present.
  • Page 184: Theft Deterrent System

    Section 3 The system is not armed if you lock The horn will sound and the turn the doors with the key, the manual signal lights will flash for up to 30 door locks or the power door lock seconds. switches.
  • Page 185: Remote Keyless Entry

    Starting and Operating Instructions ■ REMOTE KEYLESS To test the system: To turn the alarm off, press the unlock button on the keyless entry ENTRY 1. Get inside the vehicle and transmitter or start the engine. close all the doors. This option allows you to lock or If the alarm does not work, the 2.
  • Page 186: Atin Operation

    Section 3 Operation Panic Alarm Press to activate an alarm. The Different feedback options may be horn will sound and the headlights chosen for keyless entry buttons. and tail lights will flash for 30 For more information, see "Driver seconds. To turn the alarm off Information Centre"...
  • Page 187: Transmitter Range

    Starting and Operating Instructions Transmitter Range • Check the location. Other vehi- Battery Replacement cles or objects may be blocking At times you may notice a Under normal use, the battery in the signal. Take a few steps to decrease in the range. This is your transmitter should last about the right or left.
  • Page 188: Matching Transmitters

    Section 3 Matching Transmitters Matching transmitters to your vehicle may be necessary if you lose or replace a transmitter. Even if only one transmitter is being replaced, you must rematch all of your transmitters at the same time. Up to four transmitters can be matched to your vehicle.
  • Page 189: Ignition Switch

    Starting and Operating Instructions ■ IGNITION SWITCH Turning to this position and removing the key will also CAUTION lock the steering wheel. The key can not be removed Do not leave children in the if the shift lever is not in P vehicle with the ignition key.
  • Page 190 Section 3 A warning tone will sound if 2. ACC: In this position you can 3. ON: The switch returns to the you open the driver’s door operate your electrical acces- ON position after you start the engine and release the switch. when the ignition is off and sories.
  • Page 191: Retained Accessory Power

    Starting and Operating Instructions ■ STARTING Retained Accessory Power Engine Starting INSTRUCTIONS Your vehicle has retained accesso- Make sure the park brake is ry power, which allows you to applied before starting the engine. NOTICE operate the following electrical To start a vehicle with an automat- accessories for up to 20 minutes Your engine is designed to work ic transmission, the gear selector...
  • Page 192: Computer Controlled Cranking System

    Section 3 Turn your ignition key to START. Computer Controlled Engine Starting Problems Do not push the accelerator pedal. Cranking System NOTICE Let go of the key when the engine This feature helps start the engine starts. The idle speed will go down Holding your key in START and protects components.
  • Page 193 Starting and Operating Instructions Failure to Start Cold Weather Starting Engine Flooding If the engine doesn’t start within When starting the engine in very If the engine doesn’t start within ten seconds, push your accelerator cold weather (below -18°C), turn ten seconds, the engine could be pedal all the way down and the ignition key to START and...
  • Page 194: Transmission

    Section 3 ■ TRANSMISSION Wait about 15 seconds between NOTICE each try to help avoid flattening your battery or damaging your Damage to your transmission Automatic Transmission (If starter. caused by shifting out of P fitted) (Park) or N (Neutral) with the If the engine starts, let it warm up engine racing is not covered by CAUTION...
  • Page 195 Starting and Operating Instructions See "Shift Lock Control System" CAUTION later in this section for more Make sure that the transfer case information. is in a drive gear and not in N CAUTION (Neutral). Otherwise, the vehi- cle will be free to roll even if the When you leave your vehicle, shift lever is in P (Park).
  • Page 196 Section 3 R (Reverse) N (Neutral) NOTICE Use this to back up. In this position, the engine doesn’t Damage to your transmission connect with the wheels. You can caused by shifting out of P NOTICE use N (Neutral) to restart a stalled (Park) or N (Neutral) with the engine while your vehicle is Shift to R (Reverse) only after...
  • Page 197 Starting and Operating Instructions D (Drive) When slippery road conditions 3 (Third Gear) exist, down-shifting the transmis- This position provides the best fuel This position is also used for sion may cause skidding. economy for your vehicle. normal driving. When towing a trailer with an Use this position for normal driv- This position reduces vehicle automatic transmission, operate...
  • Page 198 Section 3 2 (Second Gear) 1 (First Gear) SHIFT LOCK CONTROL SYSTEM This position gives you even more This position gives you even more Your vehicle has an automatic transmission shift lock control power than 3. You can use it on power than 2.
  • Page 199: Manual Transmission (If Fitted)

    Starting and Operating Instructions NOTE: Shift Speeds Your manual transmission has a CAUTION lock out feature which prevents shifting from fifth gear to Do not skip gears when you reverse. down-shift or you could lose control of the vehicle. You or NOTICE others could be injured.
  • Page 200: Full-Time Four-Wheel Drive

    Section 3 ■ FULL-TIME FOUR- The light may flash when you accelerate. This is normal. WHEEL DRIVE Ignore this light when you down- NOTICE shift. Also ignore this light if your vehicle Driving in the four-wheel high has four-wheel drive and the trans- lock or four-wheel low lock fer case is in four-wheel low.
  • Page 201 Starting and Operating Instructions 2. N (Neutral) 3. Four-Wheel High Lock Shift to this setting only when This setting provides extra your vehicle needs to be traction for most off-road driv- towed. ing conditions. See your dealer or a profes- Use this setting when driving sional towing service if you on sand, mud, snow or level,...
  • Page 202 Section 3 - NOTE: The indicator lights on the buttons If there is a problem with the four- will come on briefly when the igni- wheel drive system, the SERV When the transfer case is in 4WD message will appear on the tion is turned on and one light, four-wheel low lock mode, indicating the transfer case...
  • Page 203 Starting and Operating Instructions • To shift into or out of the Four- Wait for the indicator light to NOTICE Wheel Low Lock setting, the stay on solid before shifting Do not shift the transmission ignition must be on, the vehi- your transmission into gear.
  • Page 204 Section 3 To shift the transfer case into 4. Shift the transfer case into CAUTION N (Neutral) so that the vehicle Four-Wheel High. can be towed: With the transfer case in 5. Press and hold the Four-Wheel N (Neutral), the vehicle can roll 1.
  • Page 205 Starting and Operating Instructions 7. Make sure the transfer case is To shift out of the N (Neutral) 4. Release the park brake. in neutral. transfer case position: NOTICE If the indicator light for the 1. Set the park brake and apply neutral position is not lit, re- the regular brake pedal.
  • Page 206: Off-Road Driving

    Section 3 ■ OFF-ROAD DRIVING Off-road driving involves some BEFORE YOU GO OFF- new skills. And that’s why it’s very ROADING This guide is for operating your important that you read this vehicle off paved roads. There are some things to do before guide.
  • Page 207: Side Steps (If Fitted)

    Starting and Operating Instructions Before you go off-roading, you Side Steps (If fitted) NOTICE must prepare your vehicle: Your vehicle may be fitted with Do not drive off-road with the • Remove the side steps (if removable side steps. side steps attached to the vehi- fitted).
  • Page 208: Loading Your Vehicle For Off-Road Driving

    Section 3 Loading Your Vehicle for ENVIRONMENTAL CAUTION Off-Road Driving CONCERNS • Cargo on the load floor piled There are some important things Off-road driving can provide higher than the seatbacks can to remember about how to load wholesome and satisfying recrea- be thrown forward during a your vehicle.
  • Page 209: Travelling To Remote Areas

    Starting and Operating Instructions • Always carry a litter bag ... TRAVELLING TO REMOTE Does your vehicle have a winch? If make sure all refuse is removed so, be sure to read the winch AREAS from any campsite before instructions. In a remote area, a It makes sense to plan your trip, leaving.
  • Page 210: High Mobility Characteristics

    Section 3 The vehicle has an approach angle The vehicle was also designed to of approximately 37.5° and a traverse a 40% (22°) side slope at a departure angle of approximately speed of 9.7 km/h (6 mph) while 35.5°, depending on suspension fully loaded and on a high friction packages.
  • Page 211: Brake And Throttle Operation Techniques

    Starting and Operating Instructions BRAKE AND THROTTLE 3. If the wheels spin, maintain 5. Back away from the obstacle steady throttle, with your foot so you can attempt a new OPERATION TECHNIQUES off the brake pedal, to allow approach. For logs, walls, rocks, severe the traction control system to 6.
  • Page 212: Getting Familiar With Off-Road Driving

    Section 3 For mounds, wash-outs, loose The driver should do the GETTING FAMILIAR WITH up-hill slopes, ditches, etc. following: OFF-ROAD DRIVING When wheel spin occurs as the 1. Reduce throttle. It’s a good idea to practise in an vehicle is moving, the driver may area that’s safe and close to home 2.
  • Page 213: Driving Off-Road

    Starting and Operating Instructions DRIVING OFF-ROAD When you drive over bumps, CAUTION rocks, or other obstacles, your Controlling your vehicle is the key When you’re driving off-road, wheels can leave the ground. If to successful off-road driving. One bouncing and quick changes in this happens, even with one or of the best ways to control your direction can easily throw you...
  • Page 214: Crossing Obstacles

    Section 3 CROSSING OBSTACLES Large Rocks Log Crossing Roll the tyres over large rocks. Do Using the proper technique, Approach Angle not straddle large rocks. Drive over the vehicle will cross logs up to If you encounter a large dip in the them, letting the tyre envelop the 25.4 cm (10 inches) in diameter.
  • Page 215: Driving On Hills

    Starting and Operating Instructions DRIVING ON HILLS APPROACHING A HILL CAUTION Off-road driving often takes you When you approach a hill, you Many hills are simply too steep up, down or across a hill. Driving need to decide if it’s one of those for any vehicle.
  • Page 216: Driving Up-Hill

    Section 3 Here are some other things to • Are there obstructions on the DRIVING UP-HILL consider as you approach a hill. hill that can block your path Once you decide you can safely (boulders, trees, logs or ruts)? • Is there a constant incline, or drive up the hill, you need to take does the hill get sharply steeper •...
  • Page 217 Starting and Operating Instructions • Do not continue if the vehicle • Sound the horn as you CAUTION shudders or exhibits suspen- approach the top of the hill to sion hopping. Turning or driving across steep let opposing traffic know hills can be dangerous.
  • Page 218 Section 3 • If your vehicle is about to stall • If your vehicle does stall while • Never try to prevent a stall by while you are ascending a hill, you are ascending a hill, do the shifting into N (Neutral) and following: revving the engine.
  • Page 219: Driving Down-Hill

    Starting and Operating Instructions • If your vehicle does stall while DRIVING DOWN-HILL CAUTION travelling up-hill, and you are When off-roading takes you down- unable to back straight down, Shifting the transfer case to hill, you’ll want to consider a do the following: N (Neutral) can cause your number of things:...
  • Page 220: Driving Across An Incline

    Section 3 If you decide you can go down a DRIVING ACROSS AN When you drive across an hill safely, then try to keep your incline, however, the much INCLINE more narrow track width (the vehicle headed straight down, and Sooner or later, an off-road trail use a low gear.
  • Page 221 Starting and Operating Instructions • Surface conditions can be a • Hidden obstacles can make the CAUTION problem when you drive across steepness of the incline even a hill. Loose gravel, muddy worse. If you drive across a rock Driving across an incline that’s spots, or even wet grass can with the up-hill wheels, or if too steep will make your vehicle...
  • Page 222: Driving In Mud, Sand, Snow Or Ice

    Section 3 DRIVING IN MUD, SAND, When you drive on sand, you’ll CAUTION sense a change in wheel traction. SNOW OR ICE This will depend, however, upon Driving on frozen lakes, ponds When you drive in mud, snow, ice how loosely packed the sand is. or rivers can be dangerous.
  • Page 223: Driving In Water

    Starting and Operating Instructions DRIVING IN WATER If the water isn’t too deep, then CAUTION drive through it slowly. At fast Light rain causes no special off- speeds, water splashes on your Driving through rushing water road driving problems. But heavy ignition system and your vehicle can be dangerous.
  • Page 224: After You Go Off-Roading

    Section 3 ■ VEHICLE PARKING AFTER YOU GO OFF- After you go off-roading, re-install any equipment that was removed ROADING from your vehicle: CAUTION There are some things to do after • Re-install the side steps (if Do not leave your vehicle while you go off-roading.
  • Page 225: Automatic Transmission (If Fitted)

    Starting and Operating Instructions Automatic Transmission (If SHIFTING INTO P (PARK) 4. Turn the ignition key to LOCK. fitted) In order to shift into P (Park), do 5. Lock all doors and take the key the following: with you when you leave the CAUTION vehicle unattended.
  • Page 226 Section 3 SHIFTING OUT OF P (PARK) If the vehicle's battery is flat, jump Torque Lock start the vehicle. See "Jump Start- Your vehicle has an automatic If you park your vehicle on a ing" in Section 5. hill, make sure to apply the park transmission shift lock control system.
  • Page 227: Manual Transmission (If Fitted)

    Starting and Operating Instructions ■ TRACTION ® Manual Transmission (If Stabilitrak System fitted) There are three systems that This system selectively applies any control the vehicle: steering, one of the brakes to help maintain 1. Hold the clutch pedal down. brakes, and accelerator.
  • Page 228: Locking Rear Axle (If Fitted)

    Section 3 Locking Rear Axle (If fitted) NOTICE The locking rear axle can give Do not try to use this feature if added traction when driving in your vehicle is stuck and the off-road conditions such as when tyres are spinning. driving on mud, snow, sand, steep Otherwise, vehicle drivetrain hills and uneven terrain.
  • Page 229: Steering

    Starting and Operating Instructions ■ STEERING 2. With the vehicle stopped or NOTICE moving less than 3 km/h (2 mph), press the locking Do not use the locking rear axle Power Steering rear axle button. The indicator on pavement. If you lose power steering assist light will start flashing.
  • Page 230: Brakes

    Section 3 ■ BRAKES Disc Brake Wear Indicators CAUTION If the engine stops as you’re Your vehicle has four-wheel disc The brake wear warning sound driving, brake normally but don’t brakes. means that soon your brakes pump your brakes. If the engine Disc brake pads have built-in won’t work well.
  • Page 231: Brake Adjustment

    Starting and Operating Instructions Brake Adjustment Brake Pedal Travel NOTICE Every time you apply the brakes to See your dealer if the brake pedal Improperly tightened wheel stop, your disc brakes adjust them- does not return to normal height, nuts can lead to brake pulsation selves for wear.
  • Page 232: Anti-Lock Brake System

    Section 3 Anti-lock Brake System As you brake, the system receives updates on wheel speed and The anti-lock brake system helps controls braking pressure at each you maintain directional stability wheel separately to make the most on wet or slippery road surfaces. It of available tyre and road automatically controls the brake conditions.
  • Page 233: Suspension

    Starting and Operating Instructions ■ SUSPENSION To release the park brake, hold the See "Brake System Warning Light" regular brake pedal down, then in Section 1. The suspension system in your grasp the handle and press the vehicle is designed to provide a NOTICE release button to rotate the smooth and controlled ride.
  • Page 234: Vehicle Loading

    Section 3 ■ VEHICLE LOADING It is very important to know how CAUTION much weight your vehicle can CAUTION carry. The components of your vehi- cle are designed to provide This weight is called the Vehicle Things you put inside your vehi- satisfactory service if the vehicle Capacity Weight.
  • Page 235: Tyre And Loading Information Label

    Starting and Operating Instructions It also tells how many people can Certification Label ride in your vehicle and gives you The Certification label is typically TIRE AND LOADING INFORMATION the Vehicle Capacity Weight. affixed to your vehicle at one of SEATING CAPACITY TOTAL FRONT...
  • Page 236: Trailer Towing

    Section 3 ■ TRAILER TOWING The Gross Vehicle Weight Rating is Maximum Front and Rear Axle the maximum permissible loaded Weights CAUTION weight of the vehicle. It includes This is the maximum weight that the weight of the vehicle, all occu- the front axle can carry (the front If you don’t use the correct pants, fuel and cargo, as well as...
  • Page 237 Starting and Operating Instructions The maximum loaded trailer Maximum trailer weight is calcu- NOTICE weight you can pull with your lated assuming only the driver is in Pulling a trailer improperly can vehicle depends on your intended the tow vehicle and it has all the damage your vehicle and result use and what special equipment required trailering equipment.
  • Page 238 Section 3 Use the following chart to deter- If you do decide to pull a trailer, • The Gross Combination Weight mine the maximum trailer weight, here are some important points: Rating is the maximum permis- sible total loaded weight of based upon your vehicle model •...
  • Page 239 Starting and Operating Instructions • Don’t tow a trailer at all during • Never exceed the Gross Trailer • You should not park vehicles the first 800 km (500 miles) Weight Rating. with trailers on a grade (hill). your new vehicle is driven. The However, if you must park on a •...
  • Page 240: Hitches

    Section 3 • Your vehicle may show signs of Trailer Recommendations: Hitches overheating if you turn your • Do not exceed your vehicle’s It's important to have the correct engine off immediately after Cargo Weight Rating. This fig- hitch equipment. Sidewinds and towing at high altitudes on ure is the maximum weight of rough roads are a few reasons why...
  • Page 241: Safety Chains

    Starting and Operating Instructions Safety Chains Trailer Brakes Trailer Turn Signals You should always attach chains Trailer brakes of adequate size are When you tow a trailer, your vehi- between your vehicle and your required on trailers of more than cle may need extra wiring.
  • Page 242: Parking On Hills

    Section 3 Parking on Hills You should not park vehicles with 3. When the wheel chocks are in trailers on a grade (hill). However, place, release the regular CAUTION brakes until the chocks absorb if you must park on a grade, follow these steps: the load.
  • Page 243: Maintenance When Trailer Towing

    Starting and Operating Instructions When you are ready to leave after Maintenance When Trailer CAUTION parking on a hill, be sure to hold Towing Be sure the shift lever is in the regular brake pedal down Your vehicle will need service more P (Park) and the park brake is while you start the engine, shift often when you’re pulling a trailer.
  • Page 244 Section 4 - Service and Maintenance –––– Maintenance Guidelines........244 Tyres .............. 275 Add-On Equipment........244 Inflation ............276 Serv- Inspection and Rotation ........ 277 Fuel ..............244 Filling the Tank ..........247 Tyre Replacement ......... 279 Tyre Chains........... 281 Bonnet Release ..........250 Engine Compartment........250 Spare Tyre ............
  • Page 245: Service And Maintenance

    Service and Maintenance ■ MAINTENANCE ■ ADD-ON EQUIPMENT GUIDELINES Adding accessories to your vehicle can affect your vehicle’s perform- The required maintenance ance and safety. intervals vary considerably between climates, geographical Modifications may cause problems locations, terrain and driving or damage to vehicle systems such conditions.
  • Page 246 Section 4 CAUTION NOTICE NOTICE Fuel vapour is highly flamma- Use clean fuel only. Contami- Use of an inappropriate grade ble. Keep sparks, flames and nated fuel may reduce the life fuel or improper fuel additives smoking materials away from of the fuel delivery system and may result in serious damage to fuel.
  • Page 247 Service and Maintenance The engine in your vehicle is The use of petrol with an octane NOTICE designed to accept unleaded rating lower than that recom- Your vehicle was not designed petrol only. The use of leaded mended may cause engine knock. for fuels that contain methanol.
  • Page 248: Filling The Tank

    Section 4 NOTICE CAUTION Do not remove the locking fuel Static electricity can ignite fuel cap using only the key. vapour. You can be burnt and your vehicle damaged. Turning the key anti-clockwise and pulling will not remove the Before you open the fuel filler fuel cap.
  • Page 249 Service and Maintenance After unlocking the fuel cap, CAUTION CAUTION remove the fuel filler cap by push- ing the fuel cap down and turning Fuel vapour is highly flamma- If you open the cap rapidly it slowly anti-clockwise. Replace it ble.
  • Page 250 Section 4 NOTICE CAUTION CAUTION If you have to get a new cap, be • Never fill a portable fuel con- To allow room for fuel expan- sure to get the right one. Other- tainer while it is in your sion in the fuel tank (caused by wise, the cap may not vent vehicle.
  • Page 251: Bonnet Release

    Service and Maintenance ■ ENGINE CAUTION COMPARTMENT Be careful not to drop or spill things that will burn onto a hot CAUTION engine. They could start a fire Be careful not to drop or spill and you or others could be things that will burn onto a hot burnt.
  • Page 252 Section 4 8. Remote Negative Battery Ter- minal (GND) 9. Engine Oil Dipstick 10. Positive Battery Terminal 11. Brake Fluid Reservoir 12. Engine Compartment Fuse 13. Battery 14. Clutch Fluid Reservoir (If fitted) Before closing the bonnet, make sure that all filler caps are on properly.
  • Page 253: Engine Oil

    Service and Maintenance Engine oil must be kept at correct CAUTION levels to help ensure proper lubri- Used oil filters and empty oil cation of the vehicle’s engine. containers should not be It is normal for an engine to use disposed of with regular trash.
  • Page 254 Section 4 To check the oil level, do the 3. Remove the dipstick and wipe following: it clean. 1. Park the vehicle on a level sur- 4. Reinsert the dipstick all the face and apply the park brake. way until it is firmly seated. 2.
  • Page 255 Service and Maintenance Choosing the Right Oil Quality NOTICE NOTICE Use engine oil that meets the Don’t add too much oil. If your Failure to use the recommend- API SL/SM (ILSAC GF-3/GF-4) engine has so much oil that the ed oil can result in engine rating.
  • Page 256 Section 4 NOTICE Failure to use the recommend- ed oil can result in engine damage not covered by your SAE 0W-30 warranty. SAE 5W-30 SAE 10W-30 SAE 5W-40 SAE 10W-40 °C -30 °F -22 Choosing the Right Oil Viscosity If you are unable to find oil of the recommended viscosity, then SAE 5W-30 is the recommended consider the range of temperature...
  • Page 257 Service and Maintenance Engine Oil Additives Engine Oil Change Intervals The oil and oil filter change inter- vals recommended in the Mainte- Do not add anything to your The required oil and oil filter nance Schedule for your engine engine oil. Oils of the recommend- change intervals vary considerably are based on the use of recom- ed quality are all you need for...
  • Page 258: Engine Coolant

    Section 4 After the CHANGE OIL message After you change the oil, you need Engine Coolant comes on, change the engine to reset the engine oil life monitor. CAUTION oil as soon as possible within See "Driver Information Centre" in 1000 kilometres (600 miles).
  • Page 259 Service and Maintenance Check the coolant level at regular NOTICE intervals, such as when refuelling. Do not substitute any liquids for The coolant level can be checked the proper coolant mixture. by looking at the see-through Otherwise, premature corro- recovery reservoir without having sion may result and the engine to remove the cap.
  • Page 260 Section 4 Occasionally check the coolant CAUTION NOTICE level in the radiator. See "Engine Adding only plain water or a If you use the proper coolant, Overheating" in Section 5 for liquid other than the recom- you do not need any extra addi- information on adding coolant to mended coolant can be tives or inhibitors.
  • Page 261: Automatic Transmission Fluid (If Fitted)

    Service and Maintenance See the Maintenance Schedule CHECKING THE FLUID LEVEL booklet to find out when the cool- Check the fluid level at every oil ant must be replaced. change. The fluid should be at the normal CAUTION operating temperature (82-93°C) Used coolant should not be (180-200°F) when you check it.
  • Page 262 Section 4 Wait at least 30 minutes before Cold Check Procedure Check the fluid level at every checking the fluid level if you have engine oil change: Perform a cold check only to deter- been driving: 1. Park the vehicle on a level sur- mine whether the transmission has •...
  • Page 263 Service and Maintenance 6. Wait for 3 seconds, remove Always re-check the fluid level at the dipstick again and check least twice. Consistent readings the fluid level. are important for proper mainte- nance. If readings are inconsistent, Keep the dipstick pointed see your dealer.
  • Page 264 Section 4 Hot Check Procedure Check the fluid level at every 4. Run the engine at idle speed engine oil change: for about 3 to 5 minutes. The fluid should be at the normal 5. With the engine running at operating temperature (82-93°C) 1.
  • Page 265 Service and Maintenance Always re-check the fluid level at CAUTION least twice. Consistent readings are important for proper mainte- When you add fluid to the auto- nance. If readings are inconsistent, matic transmission, make sure see your dealer. not to overfill it. Overfilling will result in leakage on hot engine Add the fluid only after checking parts, and might start a fire.
  • Page 266: Manual Transmission Fluid (If Fitted)

    Section 4 When re-installing the dipstick, Manual Transmission Fluid NOTICE make sure to flip the handle back (If fitted) down to lock the dipstick in place. Too much or too little fluid can It is not necessary to check the damage your transmission.
  • Page 267: Hydraulic Clutch Fluid (Manual Transmission)

    Service and Maintenance See the "Recommended Fluids and Lubricants" chart later in this section to determine what kind of fluid to use. Check the fluid only when the Hydraulic Clutch Fluid engine is off, the vehicle is parked (Manual Transmission) on a level surface and the transmis- The clutch linkage in your vehicle sion is cool enough for you to...
  • Page 268: Transfer Case Lubricant

    Section 4 See the "Recommended Fluids and Transfer Case Lubricant Lubricants" chart later in this As it is difficult to perform the section to determine what kind of procedure yourself, have the fluid fluid to use. level checked or changed by your dealer or service centre.
  • Page 269: Front Axle Lubricant

    Service and Maintenance Front Axle Lubricant Rear Axle Lubricant It is not necessary to regularly It is not necessary to regularly check the fluid unless you suspect check the fluid unless you suspect there is a leak in the system or you there is a leak in the system or you hear an unusual noise.
  • Page 270: Power Steering Fluid

    Section 4 To check the fluid level: See the "Recommended Fluids and Lubricants" chart later in this 1. Turn off the ignition and let section to determine what kind of the engine compartment cool fluid to use. down. 2. Wipe the cap and the top of NOTICE the reservoir clean.
  • Page 271: Brake Master Cylinder Fluid

    Service and Maintenance It is not a good idea to "top up" your brake fluid. Adding brake fluid will not correct a leak. If you add fluid when the linings are worn, then there will be too much fluid when you get new brake linings.
  • Page 272: Windscreen Washer Fluid

    Section 4 If work has just been done on the NOTICE brake hydraulic system and the fluid level is low, bring it up to the Using the wrong kind of fluid proper level using DOT-4 fluid could severely damage system from a sealed container.
  • Page 273: Battery

    Service and Maintenance Battery NOTICE CAUTION Your vehicle is fitted with a battery • Don’t mix water with ready- Batteries have acid that can that requires no periodic to-use washer fluid. It could burn you and gas that can maintenance. freeze and damage washer explode.
  • Page 274: Air Cleaner/Filter

    Section 4 CAUTION CAUTION Do not use a match or flame The air filter must be placed near a vehicle’s battery. If you properly unless you are doing need more light, use a repairs or maintenance work. flashlight. If the engine is started with the Do not smoke near a vehicle’s air filter improperly positioned, battery.
  • Page 275: Recommended Fluids And Lubricants

    Service and Maintenance ■ RECOMMENDED FLUIDS AND LUBRICANTS USAGE FLUID / LUBRICANT Engine Oil Engine oil rated API SL/SM (ILSAC GF-3/GF-4) grade SAE 5W-30 or SAE 10W-30. For more information, see "Engine Oil" earlier in this section. ® Engine Coolant 50/50 mixture of clean, drinkable water and use only DEX-COOL coolant.
  • Page 276: Tyres

    Section 4 ■ TYRES CAUTION CAUTION Your new vehicle comes with high- Poorly maintained and improp- • Check the inflation pressure quality tyres made by a leading erly used tyres are dangerous. regularly. Tyre pressure tyre manufacturer. should be checked when the •...
  • Page 277: Inflation

    Service and Maintenance Inflation The air pressure indicated on the NOTICE label as "cold" should be main- See the tyre information label for tained for the tyres to perform Improper tyre pressure your vehicle’s tyre inflation properly. However, do not over- promotes adverse effects in tyre specifications.
  • Page 278: Inspection And Rotation

    Section 4 To check and adjust tyre 5. Re-check the tyre pressure. Inspection and Rotation pressure: 6. Be sure to put the valve caps Check your tyres and wheels regu- back on the valve stems. They You cannot tell if your tyres are larly for unusual wear or damage.
  • Page 279 Service and Maintenance CAUTION CAUTION Rust or dirt on the wheel, or on Incorrect wheel nuts or improp- the parts to which it is fastened, erly tightened wheel nuts can can make the wheel nuts cause the wheel to become become loose after a time.
  • Page 280: Tyre Replacement

    Section 4 Tyre Replacement Note: Some commercial truck tyres may not have tread wear The rubber in your vehicle's tyres indicators. degrades over time, even if the The tyre information label says tyres are not used. Various factors what size tyres you need. affect how quickly rubber degrades.
  • Page 281 Service and Maintenance CAUTION CAUTION CAUTION Mixing brands, sizes or types of If you add different sized Never drive faster than the tyres on your vehicle (other wheels, and then if tyres not speed for which your tyres are than the tyre brand/size/type recommended for those wheels rated, regardless of the legal originally installed on your vehi-...
  • Page 282: Tyre Chains

    Section 4 Tyre Chains Spare Tyre NOTICE See "Changing a Flat Tyre" in CAUTION Use tyre chains only where Section 5. legal, and only when you must. Use another type of traction Use chains that are the correct device only if its manufacturer size for your tyres.
  • Page 283: Wheels

    Service and Maintenance ■ WHEELS Wheel Replacement CAUTION Replace any wheel that is bent, Using the wrong replacement Wheel Alignment and Tyre cracked, or badly rusted or corrod- parts could be dangerous. It Balancing ed. If wheel nuts keep coming could affect the braking and loose, the wheel, wheel nuts and If there is unusual tyre wear or if...
  • Page 284 Section 4 CAUTION CAUTION NOTICE Putting a used wheel on the Never use oil or grease on studs Improperly tightened wheel vehicle is dangerous. or nuts. If you do, the nuts nuts can lead to brake pulsation might come loose. Your wheel and rotor damage.
  • Page 285: Vehicle Identification Number

    Service and Maintenance ■ VEHICLE Each character or digit in a vehicle identification number serves a purpose in identifying your vehicle. Use the following chart to help you IDENTIFICATION understand your vehicle’s identification number. NUMBER Understanding Your Vehicle Identification Number The primary location for the vehi- Character Character Position...
  • Page 286: Service Parts Identification Label

    Section 4 ■ SERVICE PARTS IDENTIFICATION LABEL This label is located inside the glove box. It is very helpful if you ever need to order parts. On this label, you will find the following information: • the vehicle identification number •...
  • Page 287: Fuses And Circuit Breakers

    Service and Maintenance ■ FUSES AND CIRCUIT If you ever have a problem on the road and don’t have a spare fuse, BREAKERS you can borrow one that has the same amperage. Just pick some NOTICE feature of your vehicle that you Adding some electrical equip- can get along without - like the ment to your vehicle can...
  • Page 288 Section 4 To remove the fuse box cover, You can remove fuses with a fuse Look at the silver-coloured band press the tabs on the cover, then extractor. inside the fuse. If the band is lift the cover off. broken or melted , replace the fuse.
  • Page 289 Service and Maintenance Fuse Usage Roof Light Battery; Ignition Switch Front Wiper SPARE Regulated Voltage Control Power SPARE SPARE Power Door Locks SPARE SPARE Sun Roof; Front Washer Pump SPARE FUSE Headlight Levelling PULLER Air Compressor Transfer Case Control Module Radio;...
  • Page 290 Section 4 Engine Compartment Fuse Box (Continued) Fuse Usage Fuse Usage Rear Turn Signal Light; Hazard Warn- Transmission ing Flashers Cruise Control; Inside Rear-view Powertrain Control Module 1 Mirror Mass Air Flow Sensor; Purge Solenoid Front Park Lights Injector Left Side Rear Parking Light Front Fog Lights Amplifier Powertrain Control Module B...
  • Page 291 Service and Maintenance Engine Compartment Fuse Box (Continued) Fuse Usage Fuse Usage Right Side Rear Parking Light Air Pump Spare Right Side Power Window ® Auxiliary Power 1 Anti-lock Brake System; Stabilitrak ® Solenoid Stabilitrak System; Anti-lock Brake ® System Anti-lock Brake System;...
  • Page 292 Section 4 Engine Compartment Fuse Box (Continued) Relay Relay Fuel Pump Powertrain (Starter) Front Fog Lights Rear Fog Lights (If fitted) High Beam Headlights; Low Beam Heating, Ventilation and Air Headlights Conditioning Rear Demister Retained Accessory Power Windscreen Wiper On/Off Park Lights Windscreen Wiper High/Low Diode...
  • Page 293: Bulb Replacement

    Service and Maintenance Bulb Replacement Halogen Bulbs See your dealer for any bulb CAUTION changing procedure not listed in Halogen bulbs contain pressu- this section. rised gas and may burst if dropped or scratched. You or others may be injured. Follow all instructions on the bulb package.
  • Page 294 Section 4 4. Remove the electrical connec- 4. Turn the bulb socket anti- tor by pushing the tab. clockwise to remove it. 5. Pull the bulb socket out and 5. Grasp the socket firmly and replace it with a new one. pull the bulb out.
  • Page 295 Service and Maintenance 8. Re-install the lamp assembly. 4. Turn the bulb socket anti- clockwise and pull the bulb When re-installing the light as- straight out. sembly, align the pins on the light assembly with the retain- 5. Push the new bulb into the er tabs in the vehicle’s body.
  • Page 296: Replacement Bulb Specifications

    Section 4 ■ REPLACEMENT BULB SPECIFICATIONS Headlight Bulbs ..........................H-13 Tail Lights, Stoplights, Back-Up Lights and Rear Turn Signals ..........P27/7WLL See your dealer for any bulb not listed in this section. 295 . . .
  • Page 297: Specifications And Capacities

    Service and Maintenance ■ SPECIFICATIONS AND CAPACITIES Component Specifications 3.7 L L5 Engine Type..............................L5 VIN Code ............................E Wheel Nut Torque........................140 Nm . . . 296...
  • Page 298: Capacities (Approximate)

    Section 4 Capacities (Approximate) Fuel Tank............................87.1 L Crankcase (Quantity With Filter) ....................5.7 L*† Cooling System .......................... 9.5 L† Automatic Transmission........................4.7 L Manual Transmission ........................2.3 L Transfer Case..........................1.5 L Air Conditioning Refrigerant (R-134a)....................‡ * Change filter at every oil change. † Re-check fluid level after filling. ‡...
  • Page 299: Appearance Care

    Service and Maintenance ■ APPEARANCE CARE General Motors offers products See your dealer for more specially designed to maintain the information. CAUTION appearance and to help care for your vehicle. Care should be taken to avoid contamination of the safety belt webbing with polishes, oils and chemicals, and particularly battery acid.
  • Page 300 Section 5 - Problems on the Road –––– – Jump Starting ..........300 If Your Vehicle Gets Stuck ......323 Towing............304 Rocking Your Vehicle ........324 Recovery Hooks ..........325 Engine Overheating ........304 Prob Checking and Adding Coolant ......306 Data Collection and Event Data Recorders... 326 lems Engine Fan Noise ...........309 Changing a Flat Tyre ........310...
  • Page 301: Problems On The Road

    Problems on the Road ■ JUMP STARTING NOTICE CAUTION If your battery is flat, you may use Trying to start your vehicle by Every new GM vehicle uses a another vehicle and some jumper pushing or pulling it won’t battery that requires no mainte- leads to start your vehicle.
  • Page 302 Section 5 To jump start your vehicle, 2. To ensure that the vehicles do 3. Turn off the ignition on both follow these steps: not roll, set the park brake vehicles. Turn off the radios and all lights that aren’t firmly on both vehicles NOTICE involved in the jump starting...
  • Page 303 Problems on the Road 4. Now open the bonnet and Always use the remote nega- locate the positive (+) and tive earth location instead of negative (-) battery terminals. the terminal on your vehicle’s battery. CAUTION To access your vehicle’s posi- Fans or other moving engine tive terminal, you will need to parts can injure you badly.
  • Page 304 Section 5 8. Now take the negative (-) 9. Attach the other end of the 10. Start the vehicle with the (black) lead. First connect it to negative lead to a heavy metal good battery. Run the engine part on the engine of the vehi- for a while.
  • Page 305: Towing

    Problems on the Road ■ TOWING NOTICE See your dealer or a professional Damage to your vehicle may towing service if you need to have result from electrical shorting if your vehicle towed. jumper leads are connected or disconnected incorrectly. To prevent electrical shorting, take care that the leads do not touch each other or any other metal.
  • Page 306 Section 5 The engine coolant temperature If you get the overheat warning If the overheat warning continues, gauge shows the engine coolant with no sign of steam: turn off the engine and get every- one out of the vehicle right away. temperature.
  • Page 307: Checking And Adding Coolant

    Problems on the Road The level should be at or above the CAUTION FULL COLD mark. Do not run the engine if there is If the coolant level is low, add a a leak. All the coolant could leak 50/50 mixture of water and DEX- out and cause an engine fire.
  • Page 308 Section 5 NOTICE NOTICE CAUTION If there is too much water in the Do not substitute any liquids for Steam and scalding liquids from coolant mixture, the liquid the proper coolant mixture. a hot cooling system can blow could freeze and crack the Otherwise, premature corro- out and burn you badly.
  • Page 309 Problems on the Road NOTE: If, at any time during this proce- dure, coolant begins to flow out of the filler neck, re-install the radiator pressure cap. Here’s how to add coolant to the 2. Fill the radiator with the right radiator: mixture, up to the base of the filler neck.
  • Page 310: Engine Fan Noise

    Section 5 ■ ENGINE FAN NOISE 6. Add more of the right mixture through the filler neck until Your vehicle is fitted with a the level reaches the base of clutched engine cooling fan. the filler neck. Under most driving conditions, 7.
  • Page 311: Changing A Flat Tyre

    Problems on the Road ■ CHANGING A FLAT CAUTION CAUTION (Continued) TYRE • Use the jack only for lifting Lifting a vehicle and getting the vehicle when changing under it to do maintenance or CAUTION wheels. repairs is dangerous without •...
  • Page 312 Section 5 CAUTION CAUTION CAUTION (Continued) (Continued) Avoid further tyre and wheel To help prevent the vehicle • Do not start the vehicle while damage by driving very slowly from moving while changing it is raised on the jack. to a level place and stopping. the flat tyre: •...
  • Page 313: Jack And Spare Tyre Removal

    Problems on the Road Jack and Spare Tyre 4. Remove the jack storage bag and tool bag. Removal If your vehicle has locking The jack storage bag and tool bag wheel nuts, the key is in the are located in the swing-gate. tool bag.
  • Page 314 Section 5 5. Unfasten the straps holding To access the spare tyre, do the 2. To remove the centre cap, the wheel blocks to the jack. following: place the flat end of the wheel wrench in the slot on the Remove the jack and wheel 1.
  • Page 315: Changing The Flat Tyre

    Problems on the Road For wheels with a wheel lock key, use the wheel lock key between the lock nut and wrench. See "Storing Tyre and Jacking Equipment" later in this sec- tion for more information. 4. Always close and latch the spare tyre cover.
  • Page 316 Section 5 4. Place the jack under the jack- - If the flat tyre is on a front - If the flat tyre is on a rear ing point nearest the tyre you wheel, place the jack on the wheel, place the jack under want to change.
  • Page 317 Problems on the Road 6. Raise the vehicle off the CAUTION ground until there is room for Getting under a vehicle when it the spare tyre to fit. is jacked up is dangerous. If the vehicle slips off the jack, you could be badly injured or killed.
  • Page 318 Section 5 CAUTION Rust or dirt on the wheel, or on the parts to which it is fastened, can make the wheel nuts become loose after a time. The wheel could come off and cause an accident. When you change a wheel, remove any rust or dirt from the places where the 7.
  • Page 319 Problems on the Road CAUTION Never use oil or grease on studs or nuts. If you do, the nuts might come loose. Your wheel could fall off, causing a serious accident. 9. Place the spare tyre on the wheel mounting surface. 10.
  • Page 320 Section 5 15. Restow tyre and jacking CAUTION NOTICE equipment in reverse order as Incorrect wheel nuts or improp- Improperly tightened wheel removal. erly tightened wheel nuts can nuts can lead to brake pulsation See "Storing Tyre and Jacking cause the wheel to become and rotor damage.
  • Page 321: Storing Tyre And Jacking Equipment

    Problems on the Road Storing Tyre and Jacking 5. Try to move the tyre with your NOTICE hands to be sure that it is Equipment Make sure the spare tyre cover secured in place. TYRE STORAGE is completely closed before 6.
  • Page 322 Section 5 CAUTION Storing a jack, a tyre or other equipment in the passenger’s compartment of the vehicle could cause injury. In a sudden stop or collision, loose equip- ment could strike someone. Store all these in the proper place. JACKING EQUIPMENT STORAGE 3.
  • Page 323: Rear-Mounted Spare Tyre

    Problems on the Road Rear-Mounted Spare Tyre Although the spare tyre was fully The spare tyre is made to be inflated when your vehicle was driven at speeds up to 112 km/h The spare tyre is attached to the new, it can lose air after a time. (70 mph).
  • Page 324: If Your Vehicle Gets Stuck

    Section 5 ■ IF YOUR VEHICLE GETS CAUTION NOTICE STUCK If you let your tyres spin at high Spinning the wheels can If your vehicle gets stuck in sand, speed, they could explode. You destroy parts of the vehicle, mud, ice or snow, you will need to or others could be injured.
  • Page 325: Rocking Your Vehicle

    Problems on the Road Rocking Your Vehicle 2. Press the traction control but- 3. Then, with the wheels straight ton, located on the instrument ahead, do the following: To free your vehicle when it is panel near the sound system, Shift the transmission back stuck: to turn the Traction Control...
  • Page 326: Recovery Hooks

    Section 5 You may use them to pull the vehi- cle out if it is stuck in sand, mud, snow, etc. CAUTION During use, keep people away from the vicinity of the recovery hooks and any chains or cables. Always pull the vehicle straight out.
  • Page 327: Data Collection And Event Data Recorders

    Problems on the Road ■ DATA COLLECTION Some modules may also record During a crash, your vehicle may data about how you operate the record information about the AND EVENT DATA vehicle, such as the rate of fuel condition of the vehicle and how it RECORDERS consumption or average vehicle was operated, and how the various...
  • Page 328 Section 5 Law enforcement agencies or GM will only access this informa- Some vehicles use radio frequency others may have equipment that tion with the consent of the vehi- identification technology for cle owner or lessee, in response features such as tyre pressure can retrieve the information if they have access to the vehicle or to the to an official request of police or...
  • Page 330: Index

    Index Audio - Radio Controls ........73, 83 Audio - Song List Mode ........96 Accessories - Retained Accessory Power ..131, 190 Audio - Accessory Power Outlet .........25, 58 Sound System With 6-Disc CD Changer ... 83 Add-On Equipment ...........244 Audio - Air - Air Cleaner/Filter ........273 Sound System With Compact Disc Player ..
  • Page 331 Index B (Continued) Cargo - Tyre and Loading Information Label ..234 Cargo - Vehicle Loading ........233 Brake System Warning Light ........32 Cautions - Important Safety Precautions ..6-20 Brakes ...............229 Chains - Trailer Towing Safety Chains ....240 Brakes - Adjustment ..........230 Chains - Tyre Chains .........
  • Page 332 Index C (Continued) Compact Disc - Compact Disc Changer ....90 Dash - Instrument Cluster ......25, 27 Compact Disc - Song List Mode ......96 Dash-Mounted Instruments and Controls ... 25 Compact Disc - Sound System With Data Collection ..........326 6-Disc CD Changer ...........83 Defrosting ............
  • Page 333 Index D (Continued) Engine - Engine Starting ........190 Engine - Engine Starting Problems ....191 Driving - High Mobility Characteristics ....209 Engine - Failure to Start ........192 Driving - In Water ..........222 Engine - Oil Pressure Warning Light ....31 Driving - Engine - Overheating ........
  • Page 334 Index F (Continued) Four-Wheel Drive - Driving in Water ....222 Hazard Warning Flasher ........ 25, 53 Four-Wheel Drive - Headlights - High Beam Indicator ....... 27 High Mobility Characteristics ......209 Headlights - High/Low Beam Control ....103 Four-Wheel Drive - Headlights - Levelling Control ......
  • Page 335 Index I (Continued) Inflation - Tyre Inflation ........276 Label - Certification Label ........234 Instrument Cluster ........25, 27 Label - Maximum Front and Rear Axle Weights . 235 Instrument Panel - Light Dimmer Control ....62 Label - Safety Compliance Label ......285 Instruments - Dash-Mounted Instruments ...25 Label - Service Parts Identification Label ....
  • Page 336 Index L (Continued) Lubricant - Front Axle Lubricant ......268 Lubricant - Rear Axle Lubricant ......268 Lights - Bulb Replacement .........292 Lubricant - Transfer Case Lubricant ....267 Lights - Controls ..........25 Lubricants - Lights - Dome Light ..........64 Recommended Fluids and Lubricants ....
  • Page 337 Index Maintenance - Power Steering Fluid ....269 Maintenance - Power Steering Fluid Reservoir ...251 Odometer ............. 28, 42 Maintenance - Radiator Cap ......251 Off-Roading - Maintenance - Rear Axle Lubricant ....268 Brake and Throttle Operation Techniques ..210 Maintenance - Off-Roading - Crossing Obstacles ......
  • Page 338 Index Radio - Care of Your Compact Discs ....99 Radio - Compact Disc Changer ......90 Parking - Park Brake ........25, 231 Radio - Radio Controls ........73, 83 Parking - Parking a Trailer on Hills .....241 Radio - Song List Mode ........96 Parking - Vehicle Parking ........223 Radio - Sound System With 6-Disc CD Changer ..
  • Page 339 Index R (Continued) Safety - Safety Belt Use During Pregnancy ..149 Safety - Safety Belts ........... 140 Restraints - Passenger Air Bag On/Off Indicator .163 Safety - Safety Compliance Label ...... 285 Restraints - Passenger Sensing System ....157 Safety - Shoulder Belt Comfort Guides ....146 Restraints - Replacing Safety Belts ......148 Safety - Shoulder Belt Height Adjuster ....
  • Page 340 Index S (Continued) Starting - Engine Flooding ........ 192 Starting - Engine Starting ........190 Sound System - Antenna ........100 Starting - Engine Starting Problems ....191 Sound System - Anti-Theft Feature ....100 Starting - Failure to Start ........192 Sound System - Starting - Ignition Switch ......
  • Page 341 Index S (Continued) Towing - Trailer Towing Safety Chains ....240 Towing - Trailer Turn Signals ......240 Storage - Rear Cargo Area .........123 Traction ............226 Storing Tyre and Jacking Equipment ....320 Traction - Locking Rear Axle ......227 Stuck - If Your Vehicle Gets Stuck ......323 Traction - Stabilitrak System ........
  • Page 342 Index T (Continued) Transmitter - Transmitter Range ......186 Warning Light - Air Bag Light ...... 39, 156 Trip Odometer ..........28, 42 Warning Light - Trip Odometer - Reset Button ......28 Engine Oil Pressure Warning Light ....31 Turn Signal ............102 Warning Light - Malfunction Indicator Light ..

Table of Contents