Multi-Function Lever; Turn Signal - GMC Hummer H3 2008 Owner's Handbook Manual

Instrumentation and Controls
■ MULTI-FUNCTION
LEVER

Turn Signal

To signal a turn, move the lever all
the way up (right) or down (left).
When the turn is over, the lever
will return automatically. To signal
a lane change, just raise or lower
the lever until the arrow starts to
flash. Hold it there until you
complete your lane change. An
arrow on the instrument cluster
will flash in the direction of the
turn or lane change.
If the arrows flash at a faster rate
than normal, a signal bulb may be
burnt out. Check the front and
rear signal lights to make sure they
are working properly.
. . . 102
If a bulb is burnt out, replace it to
help avoid an accident.
If the arrows don't turn on at all
when you signal a turn or lane
change, check for burnt-out bulbs
and check the fuse.
See "Fuses and Circuit Breakers" in
Section 4 for additional
information.
If a turn signal is left on for more
than 1.2 km (3/4 mile), a chime
will sound and the TURN SIGNAL
message will appear on the Driver
Information Centre display to
remind you to turn it off. If you
need it on longer, turn the signal
off, then back on.