GMC Hummer H3 2008 Owner's Handbook Manual page 106

To Get Out of Cruise Control
To temporarily turn off cruise
control without erasing the set
speed memory, do the following:
• Step on the brake pedal or
push the clutch pedal if you
have a manual transmission.
The Cruise Control light will turn
off.
To turn off cruise control and erase
the set speed memory, do the
following:
• Move the cruise control switch
to the left, "off" position.
or
• Turn off the ignition.
To Go Back to Your Set Speed
If you have temporarily turned off
cruise control without erasing the
set speed memory, do the follow-
ing to re-engage cruise control:
• Once you're going about
40 km/h or more, you can
move the cruise switch briefly
to the right, resume/accelerate
position. You'll go right back
up to your chosen speed and
stay there.
Section 1
When you move the switch to the
resume/accelerate position to
return to your chosen speed, don't
hold the switch there. If you hold
it, the vehicle will accelerate and
continue to gain speed. It will keep
going faster until you release the
switch or apply the brake.
105 . . .