Picking Up A Remote Call By Blf List Key; Transferring A Call By Blf List Key - Yealink T54W User Manual

Figure 28. BLF Parked Call Monitor

4.5.6 Picking up a Remote Call by BLF List Key

When the monitor user is not at their desk and someone rings their line, you can pick up the call
simply by pressing the flashing BLF List key. You can also check the Caller ID first, and then pick
up the incoming call.
Before You Begin: Check with your system administrator to find out if this feature is available on
your phone.
Procedure
1. Do one of the following:
Press the BLF List key to pick up the call for the monitored line directly.
•
Long press the BLF List key.
•
The Pick Up, Send, New Call and Cancel appear on the screen.
•
2. Select Pick Up to pick up the call.
If there are multiple incoming calls on the monitored line, select the desired call to pick
•
up.
4.6 T ransferring a Call by BLF List Key
When there is already an active call on the IP phones, you can transfer the active call to the
monitored user by pressing the BLF List key.
The phone transfers (Blind Transfer or Attended Transfer) the active call differently depending on
the Transfer Mode via Dsskey feature configured by the system administrator.
Note: During a call, you can press the BLF List key to select a transfer mode. Check with your
system administrator to find out if this feature is available on the phone.
MetroNet -Yealink Desk Phones T54W & T57W User Guide
Version 1.0
10.25.2021
64