Your system administrator can configure your phone to display the call information when the
specified monitored line receives an incoming call.
You can select to pick up the call to the monitored line, place a call to the monitored line, place a
new call or go back to the idle screen.
Figure 27. Visual Alert for BLF Pickup
Note:
If you press Cancel, to go back to the idle screen, you can long press the BLF key to enter
the Calls for Pickup screen again.
4.5.4 Ring Type for BLF Parked Call Monitor
The Audio Alert for BLF Parked Call Monitor feature allows your phone to play a tone when a call
is parked against the monitored user's phone number.
4.5.4.1
Setting an Alert Tone for the BLF Parked Call Monitor
You can set the alert ring type when there is a call parked to the monitored lines.
Before You Begin: Check with your system administrator to find out if the Audio Alert for BLF
Parked Call Monitor feature is available.
Procedure
1. Navigate to Menu > Basic > Sound > Ring Type for BLF Parked Call Monitor.
2. Select the desired ring tone.
3. Select Save.
4.5.5 Visual Alert for BLF Parked Call Monitor
Your system administrator can configure your phone to display the call information when the
specified monitored line receives an incoming call.
MetroNet -Yealink Desk Phones T54W & T57W User Guide
Version 1.0
10.25.2021
63