Yealink T54W Quick Start Manual

Yealink T54W Quick Start Guide
Using Basic Call Functions

Placing a Call

Using the handset:
1. Pick up the handset.
2. Enter the number, and then press
Using the speakerphone:
1. With the handset on-hook, press
2. Enter the number, and then press
Using the headset:
1. With the headset connected, press
2. Enter the number, and then press
Note: During a call, you can alternate between the headset, hands-free speakerphone and handset modes by
Reject
pressing , pressing the
mode requires a connected headset.

Answering a Call

Using the handset:
Pick up the handset.
Using the speakerphone:
Press .
Using the headset:
Press .
Note: You can reject an incoming call by pressing

Ending a Call

Using the handset:
Hang up the handset or press the
Using the speakerphone:
Press or End Call
Using the headset:
End Call
Press .

Redialing a Call

• Press to enter the
• Press twice when the phone is idle to dial out the last dialed number.

Muting and Un-muting a Call

• Press to mute the microphone during a call.
• Press again to un-mute the call.

Holding and Resuming a Call

To Hold a call:
Hold
Press or during an active call.
1
Send
.
.
Send
.
to activate the headset mode.
Send
.
HEADSET
key, the
End Call
soft key.
.
Placed Calls
list, press
Speakerphone
key or by picking up the handset. Headset
Reject
.
or to select the desired entry, and then press
Send
or .