8.1.2 Configuration of the SRC1420 via the web interface
The web interface of the SRC1420 delivers state values for the entire system.
Determine the SRC1420 system from the list of ads-tec devices and enter this IP address in the browser.
The web interface is displayed.
8.1.2.1 EMS operating mode
NOTE
Observe documentation.
For details on the EMS communication interface, see the description "ADS-
TEC EMS_StoraXe Machine Interface".
For details on setting the smart meters, see the description "Connection and
parameterisation of the power meters".
Make the following pre-settings for commissioning:
•
Configure the type, address and function of the smart meters used according to the instructions
(Connection and parameterisation of the power meters).
Select the desired apps with their parameters.
•
Enter the IP address of the LAN interface for integration into the customer network
•
( 8.1.1 Network overview)
INFO: The IP address of the WAN interface for device communication is already preset.
•
Make further customisations as required.
•
8.1.2.2 Master operating mode
NOTE
Observe documentation.
For details on the Master communication interface, see the description "ADS-
TEC Master".
Make the following pre-settings for commissioning:
Enter the IP address of the LAN interface for integration into the customer network
•
( 8.1.1 Network overview)
•
Activate the Modbus function and deactivate the EMS function.
•
Make further customisations as required.
8.1.3 Configuration of the SRC4310 via the web interface
The SRC4310 is already preconfigured.
Page 54 of 72
GSS0608
Commissioning
Version: 1.3