7.4.3 AC power connection
The AC power cable is fed in via the cable inlet on the underside of the housing. Observe the cable cross
section
of
(Electrical diagram in manual GSS0608).
F
14: AC
IGURE
SUPPLY LINE IMPLEMENTATION
Page 42 of 72
the
5-wire
1
cable
in
the
Follow the electrical diagram for all
electrical connections.
Cable gland for AC supply line
1
Prepare the cable gland to fit
•
the existing AC supply line.
•
Feed in the 5-wire AC supply
line from the outside through
the cable gland.
•
Make sure that the cable gland
is sealed.
Use the existing C-rail to
•
provide strain relief for the AC
supply line using a suitable
cable clamp
GSS0608
Installation
electrical
diagram
Version: 1.3