Table of Contents
Advertisement
3. E045S
3.1 INTENDED USE
The FAAC E045S electronic board has been designed
to control actuators (hydraulic or electromechanical)
intended for installation in areas that are accessible to
people, the main purpose of which is to provide safe
access for goods or vehicles or people in industrial,
commercial or residential settings.
!
Any other use that is not expressly specified in
these instructions is prohibited and could affect the
integrity of the product and/or represent a source
of danger.
3.2 LIMITATIONS OF USE
- The E045S can control one or two 230 V~ actuators.
- The product may not be used in a constructional
configuration other than the one provided for by
FAAC S.p.A.
- No component part of the product may be modi-
fied.
3.3 UNAUTHORISED USE
- Do not use on motors or devices that are intended
for purposes other than operating gates.
- Uses other than the intended use are prohibited.
- It is prohibited to install the E045S on smoke and/
or fire doors.
- It is prohibited to install the E045S in environments
in which there is a risk of explosion and/or fire: the
presence of flammable gases or fumes is a serious
safety hazard (the product is not ATEX certified).
- It is prohibited to power the system with energy
sources other than those specified.
- It is prohibited to integrate commercial systems
and/or equipment other than those specified, or
use them for purposes not envisaged and author-
ised by the corresponding manufacturers.
- It is prohibited to use and/or install accessories
which have not been specifically authorised by
FAAC S.p.A.
- It is prohibited to use the E045S in the presence of
faults which could compromise safety.
- Do not allow water jets of any type or size to come
into direct contact with the E045S.
- Do not expose the E045S to corrosive chemical or
environmental agents.
E045S
3.4 PRODUCT IDENTIFICATION
model
identification code
5
day/month/year
of construction
1-E045S
dd/mm/yy
532373 - Rev.A
Advertisement
Table of Contents
