Table of Contents
Advertisement
9. UPLOAD/DOWNLOAD
There is a USB port on the E045S board that can be
used for the following:
- Load data from a USB pen drive (UPLOAD)
- saving data to a USB pen drive (DOWNLOAD).
i
Use a USB storage device that has a maximum power
consumption of 500 mA formatted with the FAT or
FAT 32 file system. The NTFS format is not recognised
by the board.
1. Turn the power off and insert the USB pen drive
into the USB port on the Logic board and then
switch on the board.
2. bo appears on the display and the USB LED comes
on.
3. Press and release the
the Upload/Download menu options (see rela-
tive table).
UPLOAD OPERATIONS
i
In order to be used, the files must be saved in the
root directory of a USB memory device (not in a
folder or a zip file and without their original names
being changed).
Display Function
US
Update FW
Uc
Upload board configuration
Ur
Upload radio codes
+ +
1. Press and hold the
ously for at least 5 seconds in order to carry out
the function displayed.
--
- the update starts:
the USB LED flashes. Release the buttons.
- The procedure ends when
no
If there are errors
appears on the display and the
red ERROR LED lights up. To display the error code,
+ +
and – – simultaneously. The error
press buttons
messages are described in the Diagnostics Section.
F F
2. Press
to return to the menu.
E045S
F F
button to scroll through
File name
E045Ssw.cod
E045.prg
E045.rad
and – – buttons simultane-
flashes on the display and
Y
appears on the display.
DOWNLOAD OPERATIONS
Display Function
dC
Download board configuration
dr
Download radio codes
1. To carry out the function displayed, press and hold
+ +
and – – buttons simultaneously for at least 5
the
00
seconds, until
2. Release the buttons and use the
to select the method for saving the file to the root
of the USB storage device:
00
saves the file without a suffix and overwrites
any existing file with the same name in the USB
memory (e.g. E045.prg)
01
saves the file by adding a 3-digit suffix to
the name (e.g. E045000.prg) and if there is
already a file with the same name in the root
of the USB memory, the number of the suffix
is incremented.
Note: the suffix must be deleted if you wish to
load the file in the upload operation.
F F
3. Press
to run.
The procedure ends when
no
If there are errors
red ERROR LED lights up. To display the error code,
+ +
and – – simultaneously. The error
press buttons
messages are described in the Diagnostics Section.
F F
4. Press
to return to the menu.
23
File name
E045.prg
E045.rad
appears on the display.
+ +
or – – buttons
Y
appears on the display.
appears on the display and the
532373 - Rev.A
Advertisement
Table of Contents
