Attaching Cables - Lexmark X940E User Manual

Note: This operation requires a #2 Phillips screwdriver.
1
Gently insert the system board into the printer.
2
Replace the cover screws, and then turn them clockwise.
3
Tighten the screws firmly.

Attaching cables

Connect the printer to the computer using a USB cable or Ethernet cable. A USB port requires a USB cable. Be sure
to match the USB symbol on the cable with the USB symbol on the printer. Match the appropriate Ethernet cable to
the Ethernet port.
Connect the two scanner cables to the scanner connectors on the back of the printer.
32