Replacing A Photoconductor - Lexmark X940E User Manual
Lexmark x940e: users guide
Hide thumbs
Also See for X940E:
- Service manual (815 pages) ,
- Technical reference (403 pages) ,
- User manual (285 pages)
Table of Contents
Advertisement
11
Close Door E.
Replacing a photoconductor
Replace the black photoconductor when 84 Replace black pc unit appears. Replace the cyan, magenta, and
yellow photoconductors when 84 Replace color pc units appears.
1
Open Door E (front printer door).
Warning: To avoid overexposing the photoconductors, do not leave the door open for more than 10 minutes.
2
Release the bar by pressing the E5 button located on the bottom of the E5 latch, lift the E5 latch, and then press
the bar down.
214
Advertisement
Table of Contents
