Table of Contents
Advertisement
PCS100 UPS-I User Manual
12.1 Cybersecurity
12.1.1
Cybersecurity Disclaimer
This product is designed to be connected to and to communicate information and data via a network interface. It
is Customer's sole responsibility to provide and continuously ensure a secure connection between the product
and Customer network or any other network (as the case may be). Customer shall establish and maintain any
appropriate measures (such as but not limited to the installation of firewalls, application of authentication
measures, encryption of data, installation of anti-virus programs, etc.) to protect the product, the network, its
system and the interface against any kind of security breaches, unauthorized access, interference, intrusion,
leakage and/or theft of data or information. ABB and its affiliates are not liable for damages and/or losses
related to such security breaches, any unauthorized access, interference, intrusion, leakage and/or theft of data
or information.
12.1.2
List of User/System accounts in ABB delivery
Linux root account is only available as a service account used with SSH. SSH port is disabled by default, however,
it can be enabled through parameter settings.
12.2 Remote Web Pages
The Graphical Display Module contains a set of web pages that are similar in format to the standard GDM pages
described in section 7.1. They may be accessed via the Ethernet port of the GDM and viewed on a remote PC using
any standard web browser.
The following pages are supported:
1
Status page
2
Event Log
3
Product page
4
Summary page
5
Service page
6
Menu page (if enabled via parameter 905 GDM Remote Menus)
Figure 12-2: PCS100 UPS-I Remote Web Pages Status Page
Each page contains the navigation panel,
and the status bar, and each page is
accessed by clicking the buttons using a
mouse.
Start (I)/Stop (O)/Reset functionality is
only supported through these pages if
remote
menu
access
parameter
A31 GDM Control Enable
115
is
enabled
via
.
Advertisement
Table of Contents
