ABB PCS100 UPS-I User Manual page 23

PCS100 UPS-I User Manual
480 V Models
150 180 1
300 361 2
450 541 3
600 722 4
750 902 5
900 1083 6
1200 1443 8
1500 1804 10
1800 2165 12
2100 2526 14
2400 2887 16
440V model (Note: This model uses 2 x 440 V, 1.5 MVA transformer)
2
3000 180 20
Note:
208 V operation is achieved by setting a 220 V PCS100 UPS-I to 208 V.
380 V operation is achieved by setting a 400 V PCS100 UPS-I to 380 V.
415 V or 440 V operation is achieved by setting a 480 V PCS100 UPS-I to 415 V or 440 respectively.
This configuration is done at the factory and must be specified when ordering.
Note:
The Frame Size shown in Table 3-2 defines the standard PCS100 UPS-I in linear side-by side layout only. It does not
include the optional Fail-Safe Bypass enclosure or dummy enclosure options. If needed, for Fail-Safe Bypass
enclosure please add additional 1xC enclosure for a PCS100 UPS-I with load current greater than 900 A.
2
Only available for Ultracapacitor Energy Storage. Please contact the factory.
900 L 2.3
900 L 3.2
900 L 4.3
900 L 5.5
900 L 6.6
2200 R 7.1
2200 R 9.1
2200 R 11.2
2200 R 13.6
4200 R 14.9
4200 R 16.6
Table 3-2: PCS100 UPS-I model range (without energy storage)
4200 R 23.5
98.5 27 25 / 10
98.9 27 25 / 10
99.1 27 25 / 10
99.1 27 25 / 10
99.1 35 50 / 120
99.2 35 50 / 120
99.2 35 50 / 120
99.3 35 50 / 120
99.2 35 50 / 120
99.3 45 65 / 120
99.3 45 65 / 120
99.3 45 65/120
Type Code
To complete the Type
Code:
Place 5 for 50Hz or 6 for
60Hz in place of the X
1xB PCS100-12-480/x0-01-L
1xB PCS100-12-480/x0-02-L
1xA 1xB PCS100-12-480/x0-03-L
1xB 1xC PCS100-12-480/x0-04-L
1xA 2xC PCS100-12-480/x0-05-L
1xA 1xB 1xC PCS100-12-480/x0-06-R
2xA 2xC PCS100-12-480/x0-08-R
2xA 1xC 1xF PCS100-12-480/x0-10-R
2xA 1xC 1xF PCS100-12-480/x0-12-R
3xA 1xC 1xF PCS100-12-480/x0-14-R
3xA 1xC 1xF PCS100-12-480/x0-16-R
Type Code
To complete the Type
Code:
Place 5 for 50Hz or 6 for
60Hz in place of the X
4xA 2xC 2xF PCS100-12-440/x0-20-L
23