Table of Contents
Advertisement
138
PCS100 UPS-I User Manual
—
19 APPENDICES
19.1 General Disclaimer
The manufacturer shall have no obligation with respect to any product which (i) has been improperly repaired or
altered; (ii) has been subjected to misuse, negligence or accident; (iii) has been used in a manner contrary to the
manufacturer's instructions; (iv) has failed as a result of ordinary wear and tear, or (v) has not been serviced and
maintained as per the manufacturers maintenance schedule and associated procedures.
19.2 Recycling Information
The main parts of the product can be recycled to preserve natural resources and energy.
Product parts and materials should be dismantled and separated.
Generally all metals, such as steel, aluminum, copper and its alloys, and precious metals can be recycled as material.
Plastics, rubber, cardboard and other packaging material can be used in energy recovery. Printed circuit boards and
DC capacitors need selective treatment according to IEC 62635 guidelines. To aid recycling, plastic parts are marked
with an appropriate identification code.
Contact your local ABB distributor for further information on environmental aspects and recycling instructions for
professional recyclers. End of life treatment must follow international and local regulations.
19.3 Waste Electrical and Electronic Equipment Information (WEEE)
The crossed-out wheeled bin symbol on the product(s) and / or accompanying documents means that used electrical
and electronic equipment (WEEE) should not be mixed with general household waste.
If you wish to discard electrical and electronic equipment (EEE), please contact your dealer or supplier for further
information.
Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on
human health and the environment, which could otherwise arise from inappropriate waste handling.
19.4 Glossary
Term
Description
CB
Circuit Breaker
CESE
Ultracapacitor Energy Storage Enclosure
CGI
Common Gateway Interface. CGI software is used when passing data between the Vcan serial
communications bus and the remote web pages.
CT
Current Transformer (sometimes means Coupling Transformer).
DSPE
Digital signal processing engine. Control processor board. Fits on top of the MSIB and VSIB
GDM
Graphic Display Module. The main HMI (Human Machine Interface) for the PCS100 products
GDMIB
Graphics Display Module Interface Board. A small circuit board inside the GDM. Its main function
is an interface between Vcan and the GDM.
MSIB
Master Stack Interface Board (located in the master module)
NC
Normally closed (Relay)
NO
Normally open (Relay)
PCB
Printed Circuit board
PCS100
A generic range of ABB LV power converter products.
PTC
Positive Temperature Coefficient temperature sensor.
Advertisement
Table of Contents
