User Interface; Graphic Display Module - ABB PCS100 UPS-I User Manual

50 PCS100 UPS-I User Manual
—

7 USER INTERFACE

7.1 Graphic Display Module

The primary user interface for configuration of the PCS100 UPS-I is via the Graphic Display Module (GDM) which is
mounted in the door of the master inverter enclosure. It allows local control of the PCS100 UPS-I and shows the
system status and provides access to the operating parameters and event history.
The GDM interface consists of several pages; each page has a navigation & control panel and the status bar at the
top. The Navigation & Control Panel and the Status Bar are displayed at all times.
The navigation panel consists of buttons allowing page selection and the control panel consists of a Start (I) /
Stop (O) / Reset button allowing local control of the product.
The status bar displays the current product status and any warning or fault condition that may be present.
Table 7-1 describes general features of GDM, and Figure 7-1 displays Status page of GDM.
The GDM screen consists of following parts:
1. Navigation & Control Panel
2. Status Bar
3. Page (selectable)
Feature
Display resolution
Display size
Color Graphic display
Touch Sensitive display
Full descriptions of status and faults
Local Start/Stop Reset Control
Status Display
Parameter adjustment
Number of Event Log records stored
Event log can be downloaded to a PC
Remote Web Pages
Modbus TCP connection
Table 7-1: PCS100 UPS-I GDM features
GDM
1024 x 600 pixels
10.1"
yes
yes
yes
yes
yes
yes
10000
yes
yes
yes