Sound Menu; Channel - Strong SRT40FC4003 User Manual

Colour
Tint
Sharpness
5.2.2 Colour Temperature
In this menu you can change the overall colour cast of the picture.
Press pq to select Colour Temperature, then press OK to enter a sub-menu. Press pq to select the
relevant picture effect (DEFAULT: Cold Normal Warm).
Cold
Normal
Warm
5.2.3 Noise Reduction
In this menu you can filter out and reduce the image noise and improve picture quality. Press pq to
select Noise Reduction, then press OK to enter a sub-menu.
Off
Low
Middle
High
Default

5.3 Sound menu

Sound Mode
Bass
Treble
Balance
Auto Volume
Surround Sound
AD Switch
S/PDIF Mode

5.4 Channel

Press MENU to display the main menu. Press t u to select Channel in the main menu. Press pq to
select the option you wish to adjust in the Channel menu.
10
Adjust the saturation of the colour based on your own preference.
No function
Adjust the peaking in the detail of the picture.
lncrease the blue tone for the white.
Increase the neutral colours for the white.
lncrease the red colour for the white.
Select to turn off video noise detection.
Detect and reduce low video noise.
Detect and reduce moderate video noise.
Detect and reduce enhanced video noise.
Set as Default.
Select your favourite sound mode for each input. Choices are Standard, Music,
Movie, Sports and User.
Adjusts the lower frequency of the sound.
Adjusts the higher frequency of the sound.
Control the sound balance between the right and left loudspeaker
(earphone).
Adjust the volume corresponding to the input audio level. Options are On
and Off.
Turns on the Sound Retrieval System.
Turn on the Audio description, you can activate the setting of AD volume.
When turn on the audio description, a narrator will describe what is
happening on the screen for blind or visually impaired viewers. (Only if
available in DTV mode.)
If you have connected S/PDIF output to digital home audio system. You can
select "Auto" to output Dolby audio automatically. If channel have this audio
channel.