Sound Menu; Installation - Strong SRT 32HA3003 User Manual

5.2.2 Colour Temperature
In this menu you can change the overall colour cast of the picture.
Press  to select Colour Temperature, then press OK to enter a sub-menu. Press  to select the
relevant picture e ect (DEFAULT: Cold Normal Warm).
Cold
Normal
Warm
5.2.3 Noise Reduction
In this menu you can lter out and reduce the image noise and improve picture quality. Press  to
select Noise Reduction, then press OK to enter a sub-menu.
O
Low
Middle
High
Default

5.3 Sound menu

Sound Mode
Bass
Treble
Balance
Enjoy Music
Auto Volume
S/PDIF Type
AD Switch
* Availability depending on broadcaster

5.4 Installation

Press MENU to display the main menu. Press  to select Installation in the main menu. Press OK it
access and press  to select the option you wish to adjust in the Installation menu. Press OK to enter
and to adjust.
Below items depend if they are available of select input source. Use SOURCE to select other source.
10
lncrease the blue tone for the white.
Increase the neutral colours for the white.
lncrease the red colour for the white.
Select to turn o video noise detection.
Detect and reduce low video noise.
Detect and reduce moderate video noise.
Detect and reduce enhanced video noise.
Set as Default.
Select your favourite sound mode for each input. Choices are Standard, Music,
Movie, Sports and User.
Adjusts the lower frequency of the sound.
Adjusts the higher frequency of the sound.
Control the sound balance between the right and left loudspeaker
(earphone).
Turns o the screen or switch to music source when it will be found on HDMI
input.
Adjust the volume corresponding to the input audio level. Options are On
and O .
If you have connected S/PDIF output to digital home audio system. You can
select "Auto" to output Dolby audio* automatically. If channel have this audio
channel. Selection PCM is only stereo audio and O is to switch o this output.
Turn on the Audio description, you can activate the setting of AD volume.
When turn on the audio description, a narrator will describe what is
happening on the screen for blind or visually impaired viewers. (Only if
available in DTV mode.)