Sound Menu - Strong SRT 32HC4043 User Manual

Noise Reduction
In the User mode, settings can be changed for Brightness, Contrast, Colour and Sharpness.
5.2.1 Contrast/Brightness/Colour Tint/Sharpness
If Picture Mode is set to Personal you are able to change the following settings
Press pq to select an option, then press t u to adjust.
Contrast
Brightness
Colour
Tint
Sharpness
5.2.2 Colour Temperature
In this menu you can change the overall colour cast of the picture.
Press pq to select Colour Temperature, then press OK to enter a sub-menu. Press pq to select the
relevant picture effect (DEFAULT: Cold Normal Warm).
Cold
Normal
Warm
5.2.3 Noise Reduction
In this menu you can filter out and reduce the image noise and improve picture quality. Press pq to
select Noise Reduction, then press OK to enter a sub-menu.
Off
Low
Middle
High
Default

5.3 Sound menu

Sound Mode
Bass
Treble
Balance
Auto Volume
Surround Sound
Eliminates noise in the picture. Available choices are Off, Low, Middle and High.
Adjust the highlight intensity of the picture, but the shadow of the picture is
invariable.
Adjust the optical fibre output of the entire picture, it will affect the dark
region of the picture.
Adjust the saturation of the colour based on your own preference.
No function
Adjust the peaking in the detail of the picture.
lncrease the blue tone for the white.
Increase the neutral colours for the white.
lncrease the red colour for the white.
Select to turn off video noise detection.
Detect and reduce low video noise.
Detect and reduce moderate video noise.
Detect and reduce enhanced video noise.
Set as Default.
Select your favourite sound mode for each input. Choices are Standard, Music,
Movie, Sports and User.
Adjusts the lower frequency of the sound.
Adjusts the higher frequency of the sound.
Control the sound balance between the right and left loudspeaker
(earphone).
Adjust the volume corresponding to the input audio level. Options are On
and Off.
Turns on the Sound Retrieval System.
9