Table of Contents
Advertisement
antenna for maximum possible signal quality. When the signal cannot be improved anymore, fix the dish
on this position and press the BLUE Scan button to continue.
Channel Search
Press pq t u to highlight the options of choice and press ENTER to start the channel search.
Scan Mode
Crypted
Service Type
It is recommended to use the default settings.
3.2 DVB-T installation
Terrestrial Setting
First select the Tune Type by pressing t u to select DVB-T, ATV or DVB-T+ATV (DVB-T to search digital
broadcasts and ATV to search analogue broadcasts). Press q to continue. Press pq t u to highlight
the country that you want to install, then press ENTER to start searching.
NOTE:
3.3 DVB-C installation
Cable Setting
First select the Tune Type by pressing t u to select DVB-C, ATV or DVB-C+ATV (DVB-C to search digital
broadcasts and ATV to search analogue broadcasts). Press q to continue. Press pq t u to highlight
the country that you want to install, then press ENTER to start searching.
4.0 ELECTRONIC PROGRAMME GUIDE (EPG)
EPG stands for Digital Electronic Programme Guide. It is supplied by the programme providers and
offers information on broadcasted programmes. You can access it in digital mode by pressing EPG on
the remote control. Press EPG to bring up the EPG interface. The second bar from the top will display
the current date and time. On the list below, the channel you are currently watching will be highlighted.
Before you can view any EPG information, you have to 'activate' every channel for which you want to
view programme information. To do this, use pq to select a channel, then press ENTER to confirm.
To check programmes which will be broadcasted on a future date, scroll up to the date field with p. Use
u to select the date you want to check. Press u/2 to scroll up to the top bar in the display, then press
t u to select the Channel List. The second bar will then display one of your available channels. Go to
the channel for which you want to view information using t u. After a brief moment, the programme
information will appear. Use pq to scroll through the time slots. Press MENU to exit the EPG menu.
4.3.1 Info
Press the GREEN button to show information about the selected programme.
8
Choose between Auto Scan (recommended), Blind Scan and Network
Select FTA Channels to search Free-To-Air channels only or All Channels to
search FTA and Encrypted channels
Select DTV to search DTV channels only, RADIO to search radio channels only
or All for a complete search.
If you have an active antenna, turn it on by following the instructions in
paragraph 5.4.5 and then repeat the scan.
Advertisement
Table of Contents
