Daikin DCM601B51 Installation Manual page 40

NOTE
The "Group No. setting" menu is not displayed when the intelligent Touch Manager is
not powered on. Power on the intelligent Touch Manager and wait for a while before
trying to operate the remote controller. The "Group No. setting" menu is not displayed
also when the intelligent Touch Manager is not communicating with the indoor units
normally. Make sure that the cables are connected correctly.
3. Using the Up/Down buttons, select "Group No. setting (Group)" and press the Menu/
Enter button.
The current address setting is displayed.
<Step 3>
4. Press the Menu/Enter button to release the current address setting.
The mode indication changes from "Setting" to "Release". You are now ready to change
the DIII-NET address.
<Step 4>
5. Using the Up/Down buttons, select the address you want to set.
<Step 5>
6. Press the Menu/Enter button.
The DIII-NET address has been set.
<Step 6>
40
Group No. s e t t i n g
Group No. s e t t i n g (Group)
Group No. s e t t i n g ( U n i t )
Retur n Setting
Group No. s e t t i n g (Group)
Group No Set
1-00
Retur n Release
Group No. s e t t i n g (Group)
Group No Release
1-00
Retur n Change
Group No. s e t t i n g (Group)
Group No Set
1-03
Retur n Release
Installation Manual 3P291714-7H
DCM601B51 intelligent Touch Manager
English