Procedure For A Navigation Remote Controller - Daikin DCM601B51 Installation Manual

6. Press the Inspection/Test Operation button.
You are now brought back to the screen shown in Step 6-2.
<Step 6-1>
<Step 6-2>
4.8.3

Procedure for a navigation remote controller

The following describes how to assign a DIII-NET address when a navigation remote
controller is installed.
NOTE
You cannot perform the following procedure when the display backlight is off. In this
case, press any key to turn on the backlight before starting the procedure.
1. Press and hold the Cancel button for 4 seconds or more.
The "Field setting" menu is displayed.
<Step 1>
2. Using the Up/Down buttons, select "Group No. setting" and press the Menu/Enter but-
ton.
The "Group No. setting" menu is displayed.
<Step 2>
English
GROUP
SETTING
00 00
Cool
Set temp Room
30
30
C
C
F i e l d s e t t i n g 1/2
Test operation ON/OFF
Register Ser vice Contract
F i e l d s e t t i n g l i s t
Group No. s e t t i n g
Indoor unit Air net No. set
Error record
Retur n Setting
Installation Manual 3P291714-7H
DCM601B51 intelligent Touch Manager
HH
39