How To See Table Of Wafers; Outline Of Wafers - Fuji Electric CC-M Instruction Manual

13.1 How to see table of wafers

13.1.1 Outline of wafers

In programmable type compact controller M, control computation function is materialized by a
combination of function blocks called "wafer". One wafer operates max. three inputs and outputs
operation results to max. four output terminals. Indicated below is how to see wafer symbol.
How to see wafer symbol
Function code No.
showing function of wafer
Input terminal
(3 inputs)
Supplementary:
13 - 2
Wafer
function
code
(Input 1)
(Input 2)
(Input 3)
Picture symbolizing internal
structure of wafer
• See Item 7.13 for method of connection registration of wafer.
• The ranges of input/output values indicated in the explanation are operating
conditions.
In case of inputs outside these input ranges, a value other than indicated in the
output ranges may be outputted.
Wafer name
Principle diagram
of wafer
Wafer abbreviation
(Output 1)
(Output 2)
Output terminal
(4 outputs)
(Output 3)
(Output 4)
INP-TN1PDA3-E